Materials catalogue

Materials are grouped by section and application. Each material card gives the field of application, key properties from the manufacturer’s official technical data sheet and a reference to the source. Supply and advice: +998 94 094 52 27.

Corrosion protection

Coatings for tanks and pipelines 45

  • Belzona 1392 (Ceramic HT2)Belzona 1392 (Ceramic HT2) Belzona
    high-temperature epoxy lining for vessels and tanks in aggressive service up to 120 °C.
  • Belzona 1593 Belzona
    hand-applied epoxy lining for vessels and tanks in immersion up to 160 °C.
  • Belzona 5811 (Immersion Grade)Belzona 5811 (Immersion Grade) Belzona
    epoxy immersion coating for tanks, pipework and pumps up to 50 °C, two coats.
  • Belzona 5813Belzona 5813 Belzona
    static-dissipative epoxy coating for tanks, pipework and chemical containment, immersion to 50 °C.
  • Belzona 5821Belzona 5821 Belzona
    ceramic-filled epoxy coating for tanks and pipework in immersion up to 50 °C.
  • Belzona 5892 Belzona
    epoxy coating for tanks and vessels: immersion to 95 °C, steam-out to 210 °C.
  • Chemtech GM Jotun
    solvent-free epoxy with glass fibre mat for lining lower parts of storage tanks.
  • Dura-Plate 146 DWDura-Plate 146 DW Sherwin-Williams
    solvent-free epoxy for drinking water and food production.
  • Dura-Plate UHSDura-Plate UHS Sherwin-Williams
    ultra-high-solids epoxy tank lining to API 652, 98% volume solids.
  • EPOTECT JW Kansai Paint
    high-build epoxy enamel for tanks and pipes in water treatment facilities.
  • EPOTECT PC100 Kansai Paint
    epoxy coating for crude oil, heavy petroleum products, solvents and water.
  • Fast Clad ERFast Clad ER Sherwin-Williams
    solvent-free epoxy tank lining, 500–1500 µm in one coat, service in 24 hours.
  • INERTA 160 Teknos
    virtually solvent-free epoxy, 500 µm in a single pass by hot spray: water pipelines, hydraulic structures, piles.
  • INERTA 205INERTA 205 Teknos
    solvent-free epoxy for immersed steel and concrete, excellent abrasion resistance.
  • INERTA 270 Teknos
    epoxy tank lining: aqueous chemical solutions, crude oil, diesel and jet fuel, petrol.
  • INERTA 300 Teknos
    epoxy phenolic lining for chemical plant tanks and protection against corrosion under insulation (CUI); dry heat up to 200 °C.
  • INERTA 700 / INERTA 700 TIXINERTA 700 / INERTA 700 TIX Teknos
    solvent-free crack-bridging polyurethane for concrete bunds, rail wagons and pipelines.
  • Interline 399 International (AkzoNobel)
    epoxy novolac tank and pipe lining up to 130 °C, approved for aviation fuel.
  • Interline 704 International (AkzoNobel)
    chemically resistant epoxy lining for storage tanks, two coats of 125 µm.
  • Interline 850 International (AkzoNobel)
    epoxy phenolic lining for tanks and pipes: crude oil, petrol, aviation fuel, alkalis, drinking water.
  • Interline 925 International (AkzoNobel)
    single-coat solvent-free epoxy: crude oil, light petroleum products, drinking water.
  • Interline 984 International (AkzoNobel)
    solvent-free epoxy phenolic lining: crude oil up to 90 °C, petroleum products, biofuels.
  • Interline 994 International (AkzoNobel)
    epoxy phenolic lining for crude oil to 160 °C, biofuels, oils and molten sulphur.
  • Macropoxy C251Macropoxy C251 Sherwin-Williams
    epoxy phenolic for tank interiors and insulated pipework, dry heat to 180 °C.
  • Nova-Plate 325Nova-Plate 325 Sherwin-Williams
    ceramic and glass filled novolac lining for hot aggressive service to 149 °C.
  • Nova-Plate UHSNova-Plate UHS Sherwin-Williams
    solvent-free epoxy novolac lining for crude oil, fuel and solvent storage tanks.
  • Phenicon HSPhenicon HS Sherwin-Williams
    thin-film epoxy phenolic novolac tank lining for fuels, solvents and aviation fuel.
  • Phenoline 1205 Carboline
    glass-flake epoxy novolac: crude oil up to 121 °C, fuels, hot water.
  • PPG NOVAGUARD 650PPG NOVAGUARD 650 PPG
    solvent-free epoxy coating for crude oil and petroleum product tanks.
  • PPG NOVAGUARD 840PPG NOVAGUARD 840 PPG
    solvent-free novolac lining for crude oil to 120 °C, gasoline, jet fuel and water.
  • PPG NOVAGUARD 890PPG NOVAGUARD 890 PPG
    solvent-free novolac epoxy lining: crude to 120 °C, ethanol gasoline, biodiesel, jet fuel.
  • PPG PHENGUARD 940PPG PHENGUARD 940 PPG
    novolac phenolic epoxy topcoat of a tank system for acids, alcohols, oils, solvents.
  • PPG PHENGUARD 985PPG PHENGUARD 985 PPG
    novolac phenolic epoxy with broad chemical resistance.
  • PPG SIGMAGUARD 720PPG SIGMAGUARD 720 PPG
    reinforced epoxy tank coating, EI 1541 for jet fuel, good low-temperature cure.
  • PPG SIGMAGUARD CSF 585PPG SIGMAGUARD CSF 585 PPG
    solvent-free epoxy lining for drinking water tanks, NSF/ANSI/CAN 61.
  • PPG SIGMAGUARD CSF 650PPG SIGMAGUARD CSF 650 PPG
    solvent-free epoxy tank lining for crude, fuels and drinking water, one coat 300 µm.
  • Sher-Glass FFSher-Glass FF Sherwin-Williams
    glass flake epoxy for immersion and chemical splash, up to 500 µm per coat.
  • Tankguard 412 Jotun
    solvent-free epoxy lining for potable water and crude oil.
  • Tankguard CV Pro Jotun
    conductive epoxy lining for above-ground and underground tanks, 125–250 µm per coat.
  • Tankguard DW Jotun
    solvent-free epoxy coating for potable water tanks and pipes.
  • Tankguard HB Classic Jotun
    epoxy lining for tanks and pipes: crude oil to 90 °C, brine, drilling mud.
  • Tankguard Plus Jotun
    phenolic novolac epoxy lining for crude oil, chemicals and solvents.
  • Tankguard SF Jotun
    solvent-free phenolic novolac epoxy lining for chemical tanks and pipes.
  • Tankguard Storage Jotun
    tank lining for crude oil, petroleum products and chemicals.
  • TEKNOPUR 300-800TEKNOPUR 300-800 Teknos
    hot-spray pure polyurea for concrete waterproofing and abrasion protection, CE to EN 1504-2.

Polyurethane and polysiloxane topcoats 37

  • Acrolon 218 HSAcrolon 218 HS Sherwin-Williams
    fast-drying acrylic polyurethane topcoat for shop application, direct over organic zinc primers.
  • Acrolon 2330Acrolon 2330 Sherwin-Williams
    acrylic polyurethane with very high weather resistance.
  • Acrolon 7300Acrolon 7300 Sherwin-Williams
    high-solids acrylic urethane finish in gloss and semi-gloss, approved topcoat for FIRETEX.
  • Acrolon 7700Acrolon 7700 Sherwin-Williams
    high-solids acrylic polyurethane topcoat for C5 systems, accelerator for application from 0 °C.
  • Acrolon C137V2Acrolon C137V2 Sherwin-Williams
    two-pack acrylic urethane gloss finish with long-term colour and gloss retention.
  • Carbothane 134 HG Carboline
    thin-film high-gloss polyurethane with unlimited overcoating.
  • Carboxane 2000 Carboline
    isocyanate-free polysiloxane topcoat.
  • Conseal Touch-Up Jotun
    single-pack acrylic touch-up coating that can be applied below freezing.
  • Futura AS Jotun
    fast-drying gloss aliphatic acrylic polyurethane topcoat for atmospheric exposure.
  • Futura Classic Jotun
    glossy acrylic polyurethane topcoat with low dry spray.
  • Hardtop AX Jotun
    high-gloss acrylic polyurethane topcoat with good chemical resistance.
  • Hardtop Flexi Jotun
    flexible aliphatic acrylic polyurethane gloss topcoat, direct-to-metal capable.
  • Hardtop HB Jotun
    matt high-build acrylic polyurethane topcoat with very good colour retention.
  • Hardtop Optima Jotun
    isocyanate-free high-gloss polysiloxane topcoat, recoatable at any stage of curing.
  • Hardtop XP Jotun
    acrylic polyurethane for industrial and marine facilities; a winter grade is available.
  • Hi-Solids PolyurethaneHi-Solids Polyurethane Sherwin-Williams
    high-solids gloss acrylic polyurethane topcoat, applicable down to −7 °C.
  • Interfine 629HS International (AkzoNobel)
    two-pack isocyanate-free high-gloss acrylic finish for epoxy systems.
  • Interfine 691 International (AkzoNobel)
    isocyanate-free high-gloss epoxy acrylic finish, applicable from −5 °C.
  • Interfine 878 International (AkzoNobel)
    isocyanate-free acrylic polysiloxane finish with long-term gloss and colour retention.
  • Interfine 979 International (AkzoNobel)
    isocyanate-free acrylic polysiloxane.
  • Interthane 870 International (AkzoNobel)
    high-build semi-gloss acrylic polyurethane finish, 75–125 µm in one coat.
  • Interthane 990 International (AkzoNobel)
    high-gloss aliphatic polyurethane with extended overcoating intervals.
  • Pilot QD Topcoat Jotun
    single-pack quick-drying alkyd enamel for exterior and interior use.
  • PPG AMERCOAT 450 HPPG AMERCOAT 450 H PPG
    gloss aliphatic polyurethane topcoat with unlimited recoatability, applied from −7 °C.
  • PPG PSX 700PPG PSX 700 PPG
    high-gloss siloxane, applied over zinc primers.
  • PPG PSX 805PPG PSX 805 PPG
    low-VOC satin engineered siloxane topcoat, applied direct to zinc primers.
  • PPG PSX ONE 750PPG PSX ONE 750 PPG
    one-pack high-gloss acrylic polysiloxane topcoat with unlimited recoat window.
  • PPG SIGMADUR 1800PPG SIGMADUR 1800 PPG
    two-pack high-gloss polyurethane topcoat curing down to −5 °C.
  • PPG SIGMADUR 2800PPG SIGMADUR 2800 PPG
    fluoropolymer topcoat with 25 % fluorine, long-term colour and gloss retention.
  • PPG SIGMADUR 520PPG SIGMADUR 520 PPG
    high-build semi-gloss acrylic polyurethane finish, unlimited recoat, cures down to −5 °C.
  • PPG SIGMADUR 550PPG SIGMADUR 550 PPG
    aliphatic acrylic polyurethane topcoat.
  • RETANTECT 6000 Kansai Paint
    high-build polyurethane enamel based on an acrylic polyol.
  • Sher-Cryl M770Sher-Cryl M770 Sherwin-Williams
    one-pack water-based acrylic gloss or sheen finish, also a sealer coat over FIRETEX.
  • TEKNODUR 0050 Teknos
    semi-gloss aliphatic polyurethane topcoat that can be overcoated with itself for up to 18 months.
  • TEKNODUR COMBI 3430-05 Teknos
    high-solids polyurethane paint with anti-corrosive pigments for single-coat application direct to metal.
  • TEKNODUR COMBI 3560-09 Teknos
    polyaspartic coating with up to 93 % volume solids: single-coat protection of metal, application down to −5 °C.
  • TEKNOSILOX 3351 Teknos
    polysiloxane topcoat with 92 % volume solids for high-durability systems on steel structures, tanks and bridges.

Heat-resistant coatings 33

  • Epo-Phen FFEpo-Phen FF Sherwin-Williams
    flake-filled epoxy phenolic novolac for CUI service to 230 °C, API 652 lining.
  • Heat-Flex 7000Heat-Flex 7000 Sherwin-Williams
    waterborne acrylic aerogel insulation coating for personnel protection, −62 °C to +177 °C.
  • Heat-Flex 750Heat-Flex 750 Sherwin-Williams
    MIO-reinforced epoxy for insulated pipes and vessels, −196 to 204 °C service.
  • Heat-Flex ACEHeat-Flex ACE Sherwin-Williams
    epoxy novolac coating against corrosion under insulation, from −196 to +232 °C.
  • Heat-Flex Hi-Temp 1200Heat-Flex Hi-Temp 1200 Sherwin-Williams
    multipolymer matrix against corrosion under insulation, up to 649 °C.
  • Heat-Flex M505Heat-Flex M505 Sherwin-Williams
    one-pack matt silicone heat-resistant finish, aluminium grade up to 600 °C.
  • Intertherm 228HS International (AkzoNobel)
    epoxy phenolic coating against corrosion under insulation, up to 230 °C.
  • Intertherm 3350 International (AkzoNobel)
    waterborne acrylic thin-film insulation coating for hot surfaces up to 177 °C.
  • Intertherm 50 International (AkzoNobel)
    moisture-curing silicone for protecting steel up to 540 °C.
  • Intertherm 751CSA International (AkzoNobel)
    inorganic copolymer with aluminium against corrosion under insulation, for cycling from −196 to 650 °C.
  • Intertherm 875 International (AkzoNobel)
    one-pack coloured silicone acrylic finish up to 260 °C over zinc silicate primers.
  • Jotatemp 1000 Jotun
    heat-resistant coating on an inert multi-polymer matrix for high-temperature equipment.
  • Jotatemp 1000 HT Jotun
    ceramic copolymer CUI coating for stainless steel, P91 and ceramics, up to 1000 °C.
  • Jotatemp 210 Jotun
    phenolic novolac epoxy coating for hot pipework, including under insulation.
  • Jotatemp 250 Jotun
    glass flake epoxy composite for corrosion under insulation, −196 °C to 250 °C.
  • PPG HI-TEMP 1027PPG HI-TEMP 1027 PPG
    coating against corrosion under insulation, continuous service up to 650 °C.
  • PPG HI-TEMP 500PPG HI-TEMP 500 PPG
    silicone acrylic heat-resistant topcoat to 260 °C, 426 °C intermittent, hot-surface application.
  • PPG SIGMATHERM 175PPG SIGMATHERM 175 PPG
    high-gloss heat-resistant modified alkyd aluminium finish up to 175 °C.
  • PPG SIGMATHERM 230PPG SIGMATHERM 230 PPG
    epoxy phenol novolac for insulated steel up to 230 °C, also for cryogenic service.
  • PPG SIGMATHERM 350PPG SIGMATHERM 350 PPG
    one-pack heat-resistant silicone acrylic finish for steel up to 350 °C.
  • PPG SIGMATHERM 500PPG SIGMATHERM 500 PPG
    one-pack heat-resistant modified alkyd aluminium paint up to 500 °C.
  • PPG SIGMATHERM 540PPG SIGMATHERM 540 PPG
    single-pack silicone aluminium coating for dry heat.
  • Solvalitt Jotun
    silicone acrylic up to 600 °C in 14 heat-stable colours.
  • Solvalitt Midtherm Jotun
    one-pack silicone acrylic heat-resistant coating to 260 °C for insulated and bare surfaces.
  • TEKNOHEAT 500 Teknos
    silicone paint for hot surfaces: +200…+400 °C depending on the colour, aluminium RAL 9006 — up to +650 °C.
  • TEKNOHEAT 500-100 CS Teknos
    single-pack aluminium silicone paint for up to +650 °C that needs no pre-heating.
  • TEKNOHEAT 650TEKNOHEAT 650 Teknos
    silicone aluminium paint for hot indoor surfaces, heat resistant to +650 °C.
  • TEKNOLINE EP 305 Teknos
    epoxy phenolic primer for insulated (CUI) and uninsulated pipework and vessels up to 200 °C; cures from 0 °C.
  • Thermaline 4700 Carboline
    silicone topcoat for surfaces at 204–540 °C.
  • THERMOTECT 300 Kansai Paint
    coloured modified-silicone heat-resistant paint up to 300 °C, lead and chromium free.
  • THERMOTECT 600 Kansai Paint
    aluminium-pigmented silicone up to 600 °C that needs no heat curing.
  • THERMOTECT EP Kansai Paint
    phenolic epoxy coating against corrosion under insulation, continuous service up to 200 °C.
  • THERMOTECT WR Kansai Paint
    inorganic copolymer coating against CUI, 540 °C continuous, 650 °C peak.

Chemical protection 59

  • Asplit VEC REMA TIP TOP
    conductive carbon-filled vinyl ester mortar for acid-resistant tile and brick masonry; up to +120 °C in dry conditions.
  • Asplit VEL REMA TIP TOP
    vinyl ester laminate about 3 mm thick on two layers of glass mat for reinforced concrete drip trays, sumps and floors exposed to oxidising media; bridges cracks up to 0.25 mm, also available in a conductive version.
  • Asplit VEQ REMA TIP TOP
    mineral-filled vinyl ester mortar for acid-resistant masonry: oxidising agents, many organic media, up to +150 °C in liquids.
  • Belzona 4181 (AHR Magma-Quartz)Belzona 4181 (AHR Magma-Quartz) Belzona
    three-component repair and protection system for concrete in aggressive chemical service and heat.
  • Belzona 4301 (Magma CR1 Hi-Build) Belzona
    paste-grade composite for rebuilding surfaces and linings damaged by aggressive chemicals.
  • Belzona 4311 (Magma CR1)Belzona 4311 (Magma CR1) Belzona
    epoxy barrier coating for concrete and steel in aggressive chemical service: bunds, drains.
  • Belzona 4331 (Magma CR3) Belzona
    epoxy barrier coating for hot aggressive chemical service to 90 °C, 500 µm coats.
  • Belzona 4341 (Magma CR4)Belzona 4341 (Magma CR4) Belzona
    epoxy barrier coating for hot aggressive chemical service to 90 °C, brush or spray.
  • Belzona 4351 (Magma CR5) Belzona
    static-dissipative barrier coating for aggressive chemical service and spark-risk areas.
  • Belzona 4361 Belzona
    flexible epoxy coating for concrete secondary containment in aggressive chemical service.
  • Belzona 5815Belzona 5815 Belzona
    flexible barrier coating for secondary containment: spills and short-term chemical contact.
  • Ceilcote 2000 Flakeline International (AkzoNobel)
    flake-filled epoxy novolac for aggressive chemical environments: floors, trenches, pump pedestals.
  • Ceilcote 232 Flakeline International (AkzoNobel)
    flake-filled novolac vinyl ester for tanks, trenches and floors in aggressive chemical service.
  • Ceilcote 242 Flakeline International (AkzoNobel)
    flake-filled vinyl ester for tanks, concrete trenches, pits, bunds and chemical-resistant floors.
  • Ceilcote 652 Lining International (AkzoNobel)
    trowel-applied glass-reinforced vinyl ester lining for steel and concrete tanks, trenches, bunds.
  • Ceilcote 6640 Ceilcrete International (AkzoNobel)
    reinforced trowel-applied vinyl ester system for concrete and steel: trenches, bunds, scrubbers.
  • CEMENT BC 3004CEMENT BC 3004 REMA TIP TOP
    two-component chloroprene adhesive with HARDENER E-40 curing agent for cold bonding of linings.
  • Chemflake CV Jotun
    conductive glass flake vinyl ester lining for onshore and buried tanks, 600–800 µm.
  • Chemflake Special Jotun
    glass-flake vinyl ester for chemical tanks, ducts and concrete bunds; 600–1000 µm per coat.
  • CHEMOLINE 4 B REMA TIP TOP
    self-vulcanising bromobutyl lining for workshop and site application, from −40 to +110 °C, DIBt approval.
  • CHEMOLINE 4 CN REMA TIP TOP
    pre-vulcanised two-layer bromobutyl lining for steel and concrete, can be loaded immediately after laying.
  • CHEMOLINE 70 REMA TIP TOP
    chlorobutyl with PVC for tanks and tankers containing hydrochloric acid up to 38 % at temperatures up to +60 °C.
  • CHEMOLINE 8 REMA TIP TOP
    CSM (chlorosulphonated polyethylene) with PVC for tankers carrying changing chemical cargoes, electroplating tanks and chlorine electrolysis.
  • CHEMOLINE RT REMA TIP TOP
    bromobutyl for shop rubber lining: hydrofluoric acid, sodium hypochlorite, chromic acid; up to +120 °C.
  • CHEMONIT 33CHEMONIT 33 REMA TIP TOP
    graphite-filled ebonite for shop rubber lining: wet chlorine, hydrochloric acid, scrubbers, ion exchangers.
  • COROFLAKE 23 REMA TIP TOP
    inert flake novolac vinyl ester coating for FGD plants, storage and process tanks.
  • COROFLAKE 23 M REMA TIP TOP
    glass mat laminate with flake vinyl ester topcoat for concrete tanks, pits and floors.
  • COROFLAKE 24 REMA TIP TOP
    bisphenol-A vinyl ester flake coating for vessels and flue gas cleaning in aggressive chemical service.
  • Crislip CC4624 Blair Rubber
    chlorobutyl lining for concentrated sodium hypochlorite, vulcanised after laying.
  • Enduraflex C924BNG Blair Rubber
    chemically cured, graphite-filled semi-hard rubber for repairing linings in wet chlorine service.
  • Enduraflex RC621BC Blair Rubber
    vulcanised chlorobutyl sheet for in-situ lining and repairs; not for hypochlorite.
  • Enduraflex VE333TN Blair Rubber
    three-layer Tri-Bond natural rubber lining for chemically aggressive and abrasive media.
  • Enduraflex VE530BEP Blair Rubber
    EPDM lining for oxidising solutions and high temperatures.
  • INERTA 280 Teknos
    virtually solvent-free novolac lining for steel and concrete in immersion service: alkalis, salts, weak acids, fuels; CE marked to EN 1504-2.
  • Interline 955 International (AkzoNobel)
    glass flake novolac vinyl ester lining for chemical tanks, immersion up to 90 °C.
  • KERABUTYL BBS Steuler-KCH
    single-layer self-vulcanising bromobutyl lining, 2–6 mm, up to 110 °C: vacuum, phosphoric acid, gas cleaning.
  • KERABUTYL HT Steuler-KCH
    bromobutyl lining for high-temperature vessels: heat resistance 150 °C.
  • KERAFLAKE 6H Steuler-KCH
    trowel-applied glass flake vinyl ester for chemically and thermally loaded steel, 2 mm.
  • LINING 74 CONCRETE REMA TIP TOP
    glass mat reinforced vinyl ester laminate lining for concrete tanks, pits and containment areas.
  • Magnalux 41V2Magnalux 41V2 Sherwin-Williams
    novolac vinyl ester glass flake lining for chemical immersion across the full pH range.
  • Magnalux 41VPMagnalux 41VP Sherwin-Williams
    vinyl ester holding primer under polyester and vinyl ester linings on steel and concrete.
  • Magnalux 42PEMagnalux 42PE Sherwin-Williams
    isophthalic polyester glass flake coating for marine, aqueous and light chemical service.
  • Magnalux 42SFMagnalux 42SF Sherwin-Williams
    styrene-free glass flake bisphenol polyester for immersion and aggressive service up to 60 °C.
  • Magnalux 43VCMagnalux 43VC Sherwin-Williams
    vinyl ester acrylic wax veil coat over Magnalux glass flake linings, 200–400 µm.
  • OXYDUR iVE LC Steuler-KCH
    styrene-free conductive crack-bridging vinyl ester laminate for concrete secondary containment.
  • Plasite 4007 Carboline
    glass-flake novolac vinyl ester: a light-coloured topcoat over Plasite 4300 or a multi-coat system, including with glass cloth.
  • Plasite 4100 Carboline
    flake-filled vinyl ester for acids, oxidising agents and sulphuric acid condensate in flue gas desulphurisation systems; dry heat up to 193 °C.
  • Plasite 4110 Carboline
    abrasion-resistant flake-filled vinyl ester tank lining, 889–1143 µm in 2–3 coats; for drinking water — to NSF Std. 61 when heat-cured.
  • Plasite 4300 Carboline
    vinyl ester with inert flake filler for tank linings: 889–1143 µm in 2–3 coats, dry heat up to 193 °C.
  • Polycorp 1004 Superflexite A Polycorp
    semi-hard natural rubber for chemical resistance at elevated temperature, from 5 to 85 °C.
  • Polycorp 1019HT Polycorp
    high-temperature Triflex lining for phosphoric acid, up to 104 °C.
  • Polycorp 1024 Polycorp
    chlorobutyl lining for strong bleach solutions, from −20 to 127 °C.
  • PPG NOVAGUARD 4801PPG NOVAGUARD 4801 PPG
    solvent-free glass-flake novolac vinyl ester, 500–1500 µm: acids, solvents, hot media.
  • PRIMER PR 304 REMA TIP TOP
    primer for steel and concrete under CHEMOLINE CN linings and CEMENT BC 3004 adhesive.
  • REMAFIX S REMA TIP TOP
    elastic repair compound based on polybutadiene rubber for rubber-lined equipment.
  • Semstone 870 Carboline
    flexibilised vinyl ester system for concrete (with an aggregate broadcast or reinforcement): process areas, tank farm floors, loading and unloading areas, drip trays.
  • STEULERFLAKE SPG Steuler-KCH
    glass flake novolac vinyl ester spray lining for ducts, tanks and chimneys, 1.2 mm.
  • STEULERFLAKE VSC Steuler-KCH
    conductive graphite flake vinyl ester lining for aggressive chemical environments, 1.2 mm.
  • VULCOFERRAN 2194 Steuler-KCH
    graphite-filled NR/SBR ebonite, vulcanised on site with hot water or steam, DIBt approval.

Cold galvanising 10

  • AQUAZINGAAQUAZINGA ZINGA (Zingametall)
    two-pack water-based zinc silicate with 94 % zinc, solvent-free, up to 450 °C.
  • Fosroc GalvafroidFosroc Galvafroid Fosroc
    zinc-rich cold galvanising paint with 90 % zinc for brush and roller.
  • Rust-Oleum 1085 Cold GalvanisingRust-Oleum 1085 Cold Galvanising Rust-Oleum
    fast-drying epoxy ester primer with 90 % zinc for galvanising and weld touch-up.
  • ZINGAZINGA ZINGA (Zingametall)
    one-pack coating with 96 % zinc: stand-alone protection, duplex primer and galvanising repair.
  • ZINGA 420 ZINGA (Zingametall)
    low-VOC version of ZINGA: 96 % zinc, 110 µm system tested to C5.
  • ZINGALUZINGALU ZINGA (Zingametall)
    zinc-aluminium coating with a galvanised look for repair and touch-up of galvanised steel.
  • ZINGASPRAYZINGASPRAY ZINGA (Zingametall)
    aerosol ZINGA with 96 % zinc for touch-up of welds, edges and galvanising.
  • ZRC 221ZRC 221 ZRC Worldwide
    cold galvanizing compound with 92 % zinc and VOC reduced to 221 g/l.
  • ZRC Cold Galvanizing CompoundZRC Cold Galvanizing Compound ZRC Worldwide
    one-pack compound with 95 % zinc for galvanising repair to ASTM A780.
  • ZRC GalviliteZRC Galvilite ZRC Worldwide
    silvery 95 % zinc compound matching new galvanising, for galvanising repair.

Zinc-rich primers 36

  • Carbozinc 11 Carboline
    inorganic zinc primer that cures at temperatures down to −18 °C.
  • Carbozinc 859 Carboline
    epoxy zinc primer with rapid overcoating and Class B for slip-critical connections.
  • Interzinc 22 International (AkzoNobel)
    zinc silicate primer with rapid overcoating technology.
  • Interzinc 315 International (AkzoNobel)
    rapid-recoat epoxy zinc-rich primer, cures below 0 °C, Class B slip.
  • Interzinc 52 International (AkzoNobel)
    epoxy zinc primer for aggressive environments.
  • Interzinc 72 International (AkzoNobel)
    epoxy zinc-rich primer with 90% zinc for steel in aggressive environments.
  • Jotatemp 540 Zinc Jotun
    glass flake reinforced inorganic zinc silicate primer for hot equipment up to 540 °C.
  • Jotun Barrier Jotun
    epoxy zinc primer for environments up to CX; repair of zinc silicate and galvanising.
  • Jotun Barrier 77 Jotun
    zinc-rich epoxy primer for atmospheres up to C5 and for repairing galvanising.
  • Jotun Barrier 80 Jotun
    epoxy zinc-rich primer for atmospheres up to C5 and for repairing zinc silicate coatings and galvanising.
  • Jotun Barrier 90 Jotun
    epoxy zinc-rich primer with very high zinc dust content, up to C5.
  • Jotun Barrier ZEP Jotun
    polyamide zinc epoxy primer for structural steel in environments up to C4.
  • PPG AMERCOAT 68 HSPPG AMERCOAT 68 HS PPG
    three-component zinc-rich epoxy primer, over 80 % zinc in film, low-temperature accelerator.
  • PPG DIMETCOTE 9PPG DIMETCOTE 9 PPG
    moisture-curing inorganic zinc ethyl silicate primer, Class B slip, up to 500 °C.
  • PPG SIGMAZINC 102 HSPPG SIGMAZINC 102 HS PPG
    high-solids zinc-rich epoxy primer, 60–150 µm per coat, overcoatable after 6 hours.
  • PPG SIGMAZINC 109 HSPPG SIGMAZINC 109 HS PPG
    high-solids zinc-rich epoxy primer, recoat after 4 h, application down to 0 °C.
  • PPG SIGMAZINC 158PPG SIGMAZINC 158 PPG
    two-component zinc ethyl silicate for substrate temperatures from −90 to 500 °C.
  • Resist 78 Jotun
    inorganic zinc ethyl silicate primer for highly corrosive environments, heat resistant up to 540 °C.
  • Resist 86 Jotun
    zinc ethyl silicate primer, heat-resistant up to 540 °C.
  • Resist ZES Jotun
    moisture-curing inorganic zinc ethyl silicate primer for steel, 400 °C continuous, 540 °C peak.
  • TEKNOZINC 3231 Teknos
    epoxy zinc primer with a high zinc content (at least 90 %) for use under polysiloxane and polyurethane topcoats.
  • TEKNOZINC 3233TEKNOZINC 3233 Teknos
    one-pack moisture-cure zinc-rich urethane primer for steel structures.
  • TEKNOZINC 80 SE Teknos
    epoxy zinc primer with 80 % zinc — the standard primer in Teknos systems for C4, C5 and immersion.
  • TEKNOZINC 90 SE Teknos
    epoxy zinc primer with at least 90 % zinc in the dry film and an overcoating interval of up to 18 months.
  • TEKNOZINC ESI 3180 Teknos
    fast-drying, moisture-curing zinc ethyl silicate: dry heat up to +400 °C, application down to −5 °C.
  • TEKNOZINC SS Teknos
    two-component zinc ethyl silicate for atmospheric exposure and immersion in solvents; also a primer for heat-resistant systems up to +400 °C.
  • Zinc Clad 4700 Sherwin-Williams
    two-pack epoxy zinc primer for blast-cleaned steel to SSPC Paint 20.
  • Zinc Clad II PlusZinc Clad II Plus Sherwin-Williams
    three-component inorganic zinc ethyl silicate primer with 83% zinc, Class B slip.
  • Zinc Clad IV 85%Zinc Clad IV 85% Sherwin-Williams
    epoxy zinc-rich primer with 85% zinc, Class A slip for friction joints.
  • Zinc Clad IV EUZinc Clad IV EU Sherwin-Williams
    two-pack epoxy zinc-rich primer for blast-cleaned steel and galvanizing repair.
  • Zinc Clad J984BS Sherwin-Williams
    epoxy zinc-rich primer to BS 4652, fast drying, repair of damaged galvanizing.
  • Zinc Clad R PlusZinc Clad R Plus Sherwin-Williams
    epoxy zinc primer for systems with Macropoxy, Dura-Plate and Acrolon.
  • Zinc Clad ZSZinc Clad ZS Sherwin-Williams
    single-component ethyl silicate zinc primer; at low film thickness, a weldable shop primer.
  • ZINCTECT 1000 Kansai Paint
    fast-drying zinc silicate shop primer for plate and sections.
  • ZINCTECT 1500 Kansai Paint
    inorganic zinc silicate primer.
  • ZINCTECT 500 Kansai Paint
    high-build epoxy zinc primer with a polyamide curing agent.

Epoxy primers, intermediate coats and mastics 57

  • Carboguard 890 Carboline
    chemical-resistant self-priming mastic.
  • Carbomastic 15 Carboline
    aluminium mastic for steel with minimal surface preparation.
  • Dura-Plate 235Dura-Plate 235 Sherwin-Williams
    self-priming multi-purpose epoxy for water immersion, applicable down to −18 °C.
  • Dura-Plate 301WDura-Plate 301W Sherwin-Williams
    surface- and humidity-tolerant epoxy primer for wet, flash-rusted steel, no dew-point limits.
  • EPOTECT GF(M) Kansai Paint
    high-build glass flake epoxy, 250 µm per coat, resistant to fresh and sea water.
  • EPOTECT HB Kansai Paint
    high-build epoxy paint for the intermediate coat over zinc primers.
  • EPOTECT MIO Kansai Paint
    epoxy paint with micaceous iron oxide (MIO) and a polyamide curing agent.
  • ESCO Kansai Paint
    moisture-curing epoxy primer that penetrates rusty steel, for maintenance over St 3.
  • INERTA 165 GF Teknos
    glass-flake epoxy: 500–1000 µm per coat direct to metal, NORSOK M-501 system 7A.
  • INERTA MASTICINERTA MASTIC Teknos
    low-solvent epoxy mastic for maintenance over St 2 steel, winter hardener to −5 °C.
  • Intercure 200HS International (AkzoNobel)
    zinc phosphate MIO epoxy primer, rapid recoat, cures at low temperatures.
  • Intergard 251 International (AkzoNobel)
    fast-drying zinc phosphate epoxy primer for shop priming and chemical environments.
  • Intergard 269 International (AkzoNobel)
    quick-drying epoxy blast holding primer and tie coat over zinc silicate.
  • Intergard 345 International (AkzoNobel)
    fast-curing high-solids zinc phosphate epoxy primer-finish, 100–150 µm per coat.
  • Intergard 475HS International (AkzoNobel)
    intermediate coat, also available with micaceous iron oxide.
  • Intergard 740 International (AkzoNobel)
    high-gloss two-pack epoxy finish for primed steel and concrete, resists chemical spills.
  • Interplus 356 International (AkzoNobel)
    surface-tolerant aluminium MIO epoxy primer, cures down to −5 °C.
  • Interseal 1052 International (AkzoNobel)
    fast-curing high-solids anti-corrosive epoxy, 75–250 µm per coat, zinc phosphate or MIO.
  • Interseal 670HS International (AkzoNobel)
    surface-tolerant high-build epoxy for atmospheric exposure and immersion.
  • Intershield 300 International (AkzoNobel)
    abrasion-resistant aluminium pure epoxy for platforms, decks and underwater hulls.
  • Interzone 1000 International (AkzoNobel)
    glass flake epoxy for splash zones, jetties and subsea steel, 500–1000 µm.
  • Interzone 505 International (AkzoNobel)
    high-build glass flake epoxy, 300–500 µm per coat, for atmospheric and immersion service.
  • Interzone 954 International (AkzoNobel)
    high-build modified epoxy for the splash zone; continues to cure under water.
  • Jotacote Universal N10 Jotun
    universal pure epoxy primer for atmospheric and immersed service, cures down to −10 °C.
  • Jotamastic 80 Jotun
    surface-tolerant epoxy mastic for maintenance over aged coatings, applicable below 0 °C.
  • Jotamastic 87 Jotun
    surface-tolerant epoxy mastic for maintenance, winter grade applicable down to −5 °C.
  • Jotamastic 90 Jotun
    epoxy mastic for maintenance painting over minimal surface preparation.
  • Jotamastic Plus Jotun
    surface-tolerant epoxy mastic for maintenance over St 2 steel and aged coatings.
  • Jotamastic SF Jotun
    solvent-free surface-tolerant epoxy mastic for maintenance over St 2, winter grade available.
  • Macropoxy 400Macropoxy 400 Sherwin-Williams
    multi-functional zinc phosphate epoxy primer, build coat and low-sheen finish for C1–C5.
  • Macropoxy 4600Macropoxy 4600 Sherwin-Williams
    high-solids zinc phosphate epoxy primer for steel in C1–C5 atmospheres, applicable from −5 °C.
  • Macropoxy 646Macropoxy 646 Sherwin-Williams
    1:1 polyamide epoxy primer-finish for atmospheric and fresh or salt water immersion service.
  • Macropoxy C401Macropoxy C401 Sherwin-Williams
    micaceous iron oxide epoxy intermediate over Macropoxy and Zinc Clad primers.
  • Macropoxy EG-1 PlusMacropoxy EG-1 Plus Sherwin-Williams
    epoxy primer and intermediate coat with micaceous iron oxide.
  • Macropoxy M905Macropoxy M905 Sherwin-Williams
    low-temperature curing epoxy intermediate down to 0 °C, rapid overcoating in cold weather.
  • Macropoxy M922Macropoxy M922 Sherwin-Williams
    high-solids glass flake epoxy, up to 1000 µm per coat, applicable to hot steel.
  • Penguard Express Jotun
    fast-curing high-build primer for new construction.
  • Penguard Express MIO Jotun
    fast-drying high-build epoxy coating with micaceous iron oxide (MIO).
  • Penguard Express ZP Jotun
    fast-curing high-build epoxy primer with zinc phosphate.
  • Penguard HB Jotun
    high-build all-purpose polyamide epoxy for new construction, atmospheric and immersed service.
  • Penguard HB II Jotun
    matt high-build polyamide epoxy, applicable at sub-zero surface temperatures down to −10 °C.
  • Penguard Primer Jotun
    polyamide-cured epoxy primer for atmospheric and immersed service.
  • Penguard Pro Jotun
    universal surface-tolerant epoxy for primer, midcoat or finish, 100–500 µm per coat.
  • Penguard Universal Jotun
    universal pure epoxy for atmospheric and immersed service, applicable from −10 °C.
  • PPG AMERLOCK 2 C / SIGMACOVER 2PPG AMERLOCK 2 C / SIGMACOVER 2 PPG
    self-priming epoxy that cures down to 0 °C.
  • PPG AMERLOCK 400 C / SIGMACOVER 400PPG AMERLOCK 400 C / SIGMACOVER 400 PPG
    surface-tolerant universal epoxy for St 2 steel, damp surfaces and aged coatings.
  • PPG SIGMACOVER 280PPG SIGMACOVER 280 PPG
    aluminium-pigmented universal epoxy primer for steel, galvanising and non-ferrous metals.
  • PPG SIGMACOVER 350PPG SIGMACOVER 350 PPG
    surface-tolerant pure epoxy primer-coating, compatible with various aged coatings.
  • PPG SIGMACOVER 410PPG SIGMACOVER 410 PPG
    high-build polyamide epoxy intermediate coat curing down to −5 °C, LT version available.
  • PPG SIGMACOVER 456PPG SIGMACOVER 456 PPG
    high-build recoatable epoxy buildcoat or finish, cures down to −10 °C.
  • PPG SIGMAFAST 278PPG SIGMAFAST 278 PPG
    fast-curing high-solids zinc phosphate epoxy primer and buildcoat, cures down to −5 °C.
  • PPG SIGMAPRIME 200 PPG
    universal pure epoxy primer for ballast and cargo tanks, decks and hulls.
  • TEKNOMASTIC 80 PRIMER Teknos
    epoxy primer with 82 % volume solids, compliant with NORSOK M-501 (systems 1, 7A, 7B); maintenance painting over St 2 preparation; winter curing agent for use down to −5 °C.
  • TEKNOMASTIC COMBI 80 E Teknos
    high-solids epoxy certified to ISO 12944-9: CX for areas subject to impact and Im4 immersion.
  • TEKNOPLAST HS 150 Teknos
    high-build epoxy paint — primer and topcoat for buried and underwater structures; also a vapour barrier on concrete.
  • TEKNOPLAST PRIMER 7 Teknos
    epoxy primer with 70 % volume solids for steel, zinc and aluminium; overcoating interval of up to 12 months.
  • TEKNOPLAST PRIMER 7 MIOX Teknos
    epoxy primer and intermediate coat with micaceous iron oxide (MIOX), compliant with SSG 1021-GS.

Waterproofing

Tank waterproofing 5

  • Fosroc Nitocote CM210Fosroc Nitocote CM210 Fosroc
    polymer-modified cementitious waterproofing for water tanks and reservoirs, WRAS approved.
  • Fosroc Nitocote EP405Fosroc Nitocote EP405 Fosroc
    solvent-free epoxy lining for tanks and water treatment works, potable water approved.
  • Fosroc Nitoseal MS600Fosroc Nitoseal MS600 Fosroc
    one-part MS polymer sealant for joints under permanent immersion, potable water approved.
  • Fosroc Polyurea WPWFosroc Polyurea WPW Fosroc
    hot-spray pure polyurea lining for drinking water tanks, WRAS listed to 60 °C.
  • Planiseal 88Planiseal 88 Mapei
    osmotic cementitious mortar for drinking water tanks and basements, formerly Idrosilex Pronto.

Joint waterproofing 16

  • Fosroc Supercast PVCFosroc Supercast PVC Fosroc
    PVC waterstops for expansion and construction joints, up to 100 m head.
  • IdrostopIdrostop Mapei
    hydrophilic swelling acrylic rubber profile for construction joints, watertight up to 5 atm.
  • Mapeband EasyMapeband Easy Mapei
    elastic rubber tape for corners and control joints in cementitious waterproofing.
  • Mapeband TPEMapeband TPE Mapei
    thermoplastic elastomer tape for waterproofing expansion joints with 5–10 mm movement.
  • Mapeproof SwellMapeproof Swell Mapei
    water-swelling rubber paste for sealing pipe penetrations, construction joints and cracks.
  • PENEBAR SW-55PENEBAR SW-55 Penetron
    bentonite-filled butyl rubber swelling waterstop for non-moving construction joints.
  • Sika Waterbar FB-125Sika Waterbar FB-125 Sika
    fully bonded flexible polyolefin waterstop for construction joints in concrete.
  • Sikadur-Combiflex SG-10 PSikadur-Combiflex SG-10 P Sika
    FPO tape bonded with epoxy for waterproofing expansion joints and cracks.
  • SikaFuko VT-1SikaFuko VT-1 Sika
    re-injectable injection hose for construction joints, tested up to 10 bar.
  • SikaSwell ASikaSwell A Sika
    water-swelling acrylic profile for construction joints and pipe penetrations in concrete.
  • SikaSwell S-2SikaSwell S-2 Sika
    water-swelling PU sealant for construction joints and bonding SikaSwell profiles.
  • PeneBandPeneBand Penetron
    elastic expansion-joint tape that can be installed on damp substrates and underwater.
  • PeneBand SPeneBand S Penetron
    elastic tape bonded with epoxy for expansion joints, elongation over 1000 %.
  • PenebarPenebar Penetron
    swelling 17×23 mm waterstop cord for construction joints and pipe penetrations.
  • PenecretePenecrete Penetron
    mortar for sealing static joints, cracks and pipe penetrations in chased grooves.
  • PenePoxyPenePoxy Penetron
    one-component elastic adhesive sealant for PeneBand tape and pipe penetrations.

Hydraulic plugs 16

  • Ceresit CX 5Ceresit CX 5 Henkel (Ceresit)
    rapid-hardening assembly cement for anchoring and temporary sealing of spot leaks.
  • Fosroc Renderoc PlugFosroc Renderoc Plug Fosroc
    rapid-setting cementitious plugging mortar for emergency water stopping in tunnels and chambers.
  • ISOMAT AQUAFIXISOMAT AQUAFIX ISOMAT
    rapid-setting cement for instant plugging of local leaks and quick anchoring.
  • KÖSTER WaterstopKÖSTER Waterstop KÖSTER
    expanding fast-curing plugging mortar for sealing leaks, including pressurised water.
  • Krystol PlugKrystol Plug Kryton
    rapid-setting hydraulic cement for stopping flowing water in concrete cracks and joints.
  • LamposilexLamposilex Mapei
    ultra-rapid hydraulic binder for instant stopping of leaks, including water under pressure.
  • MC-Fast SM MC-Bauchemie
    fast-setting swelling plugging mortar for permanent sealing of leaks and pipe inlets.
  • PENEPLUGPENEPLUG Penetron
    rapid-setting crystalline water plug for stopping active leaks, including under water.
  • Remmers WP RH rapidRemmers WP RH rapid Remmers
    quick-setting plugging mortar for leaks and water inrushes, setting in about 30 seconds.
  • Schomburg FIX-20-TSchomburg FIX-20-T Schomburg
    rapid-setting swellable mortar for sealing water-bearing holes and cracks in concrete.
  • Sika MonoTop-108 Water PlugSika MonoTop-108 Water Plug Sika
    rapid-setting cement mortar for instantly plugging leaks in concrete and masonry.
  • SikaTop-591 Seal Sika
    expanding rapid-setting mortar for stopping active leaks and sealing pipe penetrations.
  • SikaTop-596 SealSikaTop-596 Seal Sika
    ultra-rapid cementitious water plug for emergency leak stopping, also suited to cold weather.
  • Xypex Patch'n PlugXypex Patch'n Plug Xypex
    fast-setting hydraulic cement with crystalline chemistry for stopping active leaks.
  • WaterplugWaterplug Penetron
    fast plug mortar for stopping pressurised leaks, sets in about three minutes.
  • PeneplugPeneplug Penetron
    rapid-setting plug mortar for instantly stopping pressurised leaks in concrete.

Liquid membranes 5

  • Fosroc Nitoproof 600Fosroc Nitoproof 600 Fosroc
    pitch-modified one-component polyurethane membrane for foundations, basements and roofs.
  • Fosroc Nitoproof 725 Fosroc
    UV-resistant water-based hybrid polyurethane membrane for exposed roofs, SRI 106.
  • Fosroc Proofex LMFosroc Proofex LM Fosroc
    two-component bitumen-rubber liquid membrane for below-ground structures, up to 70 m head.
  • Sikalastic M 640Sikalastic M 640 Sika
    one-component polyurethane liquid membrane for roofs, balconies and terraces.
  • Sikalastic-822Sikalastic-822 Sika
    hand-applied polyurethane membrane under mastic asphalt on concrete bridge decks.

Injection waterproofing 10

  • Fosroc Nitofill WS60Fosroc Nitofill WS60 Fosroc
    PU injection resin for temporary stopping of water flow in concrete cracks.
  • LamposilexLamposilex Mapei
    ultra-rapid hydraulic binder for instant stopping of leaks, including water under pressure.
  • Resfoam 1K-MResfoam 1K-M Mapei
    one-component PU injection resin for stopping water seepage in concrete and ground.
  • Sika Injection-101 RCSika Injection-101 RC Sika
    fast-foaming PU injection resin for temporary stopping of heavy water ingress.
  • Sika Injection-201 CESika Injection-201 CE Sika
    elastic PU injection resin for permanent sealing of cracks and construction joints.
  • SikaInject-304 DESikaInject-304 DE Sika
    polyacrylate gel for curtain injection and permanent sealing of cracks and joints.
  • PenePurFoamPenePurFoam Penetron
    water-reactive polyurethane foam resin (N, NR, R) for leaks and damp-proofing.
  • PenePurFoam 1KPenePurFoam 1K Penetron
    one-component water-reactive resin with catalyst forming flexible foam.
  • PenePurFoam 65PenePurFoam 65 Penetron
    water-reactive resin with catalyst forming rigid foam to stop pressurised leaks.
  • PeneSplitSealPeneSplitSeal Penetron
    two-component polyurethane injection resin for cracks, joints and damp-proof barriers.

Cementitious waterproofing 7

  • Fosroc Brushbond Fosroc
    acrylic polymer-modified cementitious protective and waterproof coating for concrete and masonry.
  • MapelasticMapelastic Mapei
    flexible two-component cementitious waterproofing for balconies, terraces, bathrooms and pools.
  • Mapelastic FoundationMapelastic Foundation Mapei
    flexible cementitious waterproofing for foundations and basements, positive and negative pressure.
  • Mapelastic SmartMapelastic Smart Mapei
    highly flexible cementitious waterproofing for channels, tanks, pools and terraces.
  • SikaTop Seal-107SikaTop Seal-107 Sika
    polymer-modified cementitious waterproofing slurry for concrete and masonry, 1.5–2 mm.
  • SikaTop-525 SealSikaTop-525 Seal Sika
    white UV-resistant flexible cement-acrylic waterproofing for tanks, pools and wet areas.
  • Skrepa 2K ElastichnayaSkrepa 2K Elastichnaya Penetron
    two-component flexible cementitious waterproofing coating bridging cracks up to 1.5 mm.

Polyurea 6

  • Fosroc Polyurea WPEFosroc Polyurea WPE Fosroc
    hot-spray pure polyurea waterproofing and protective coating for concrete and steel.
  • Purtop 1000Purtop 1000 Mapei
    hot-spray pure polyurea membrane for hydraulic works, roofs, bridge decks and tanks.
  • Purtop 400 MPurtop 400 M Mapei
    hot-spray hybrid polyurea membrane for bridge decks under asphalt and large roofs.
  • Sikalastic-841 STSikalastic-841 ST Sika
    hot-spray pure polyurea membrane for waterproofing civil structures and tanks.
  • Sikalastic-851Sikalastic-851 Sika
    hot-spray polyurethane-polyurea hybrid membrane for bridge decks, car parks and buried structures.
  • TEKNOPUR 320-800TEKNOPUR 320-800 Teknos
    hot-spray pure polyurea coating for waterproofing bitumen roofs and concrete.

Penetrating waterproofing 9

  • Fosroc Brushbond TGP Fosroc
    crystalline capillary waterproofing for concrete and masonry against shallow water pressure.
  • PENETRONPENETRON Penetron
    crystalline penetrating waterproofing for concrete, applied to the positive or negative side.
  • PENETRON ADMIXPENETRON ADMIX Penetron
    crystalline waterproofing admixture for concrete, 0.8–1.0 % by cement weight, NSF 61.
  • SikaTop-501 SealSikaTop-501 Seal Sika
    cementitious crystalline waterproofing for positive and negative water pressure.
  • Xypex Admix C-1000 / C-1000 NFXypex Admix C-1000 / C-1000 NF Xypex
    crystalline waterproofing admixture added to concrete at batching, NSF 61.
  • Xypex ConcentrateXypex Concentrate Xypex
    crystalline penetrating waterproofing slurry for concrete, positive or negative side.
  • Xypex Patch'n PlugXypex Patch'n Plug Xypex
    fast-setting hydraulic cement with crystalline chemistry for stopping active leaks.
  • PenetronPenetron Penetron
    Russian-range crystalline penetrating waterproofing for concrete, applied on either pressure side.
  • Penetron AdmixPenetron Admix Penetron
    Russian-range crystalline waterproofing admixture for concrete, 1 % by cement weight.

Resin flooring

Anti-static and conductive floors 7

  • Fosroc Nitoflor ConductiveFosroc Nitoflor Conductive Fosroc
    2 mm static-conductive epoxy floor, 5×10⁴–1×10⁶ ohms, for electronics and operating theatres.
  • Jotafloor Anti-StaticJotafloor Anti-Static Jotun
    conductive epoxy topcoat, 1.5–2 mm, for anti-static floors in cleanrooms and electronics.
  • Mapefloor I 357 ESDMapefloor I 357 ESD Mapei
    conductive self-levelling epoxy floor meeting ESD requirements for electronics and cleanrooms.
  • Resuflor SL ESDResuflor SL ESD Sherwin-Williams
    static-dissipative self-smoothing epoxy floor, resistance below 10⁹ Ω, 2.5–4.5 mm.
  • Sikafloor-220 W ConductiveSikafloor-220 W Conductive Sika
    water-dispersed conductive epoxy primer under Sikafloor conductive wearing courses.
  • Sikafloor-262 AS NSikafloor-262 AS N Sika
    smooth electrostatically conductive self-smoothing epoxy floor covering.
  • Sikafloor-305 W ESDSikafloor-305 W ESD Sika
    water-based matt polyurethane ESD seal coat for epoxy and polyurethane floors.

Polyurethane cement floors 7

  • Fosroc Nitoflor SL3000 UTFosroc Nitoflor SL3000 UT Fosroc
    3–6 mm flow-applied polyurethane concrete floor for food and pharmaceutical plants.
  • Jotafloor PU CreteJotafloor PU Crete Jotun
    antimicrobial hybrid polyurethane floor, 4–6 mm, for food and pharmaceutical plants.
  • Mapefloor CPU+/HDMapefloor CPU+/HD Mapei
    6–12 mm polyurethane-cement screed for food and chemical plants, thermal shock to +150 °C.
  • Sika Ucrete MFSika Ucrete MF Sika
    smooth heavy-duty polyurethane-cement screed, 4–6 mm, for dry process areas.
  • Sika Ucrete UD 200Sika Ucrete UD 200 Sika
    slip-resistant polyurethane-cement screed, 6–12 mm, steam-cleanable, for wet process areas.
  • Sikafloor-20 PurCem Sika
    trowel-applied polyurethane-cement wearing screed, 6–9 mm, for food and chemical plants.
  • Sikafloor-21 PurCemSikafloor-21 PurCem Sika
    self-levelling polyurethane-cement floor screed, 3–6 mm, smooth matt finish.

Polyurethane floors 6

  • Jotafloor PU TopcoatJotafloor PU Topcoat Jotun
    non-yellowing polyurethane floor topcoat for sunlit areas, 50–80 µm per coat.
  • Jotafloor PU UniversalJotafloor PU Universal Jotun
    elastic self-levelling solvent-free polyurethane, waterproof intermediate layer 0.4–4 mm.
  • Mapefloor PU 470Mapefloor PU 470 Mapei
    semi-elastic aromatic polyurethane resin for self-levelling and multi-layer industrial floors.
  • Sikafloor-305 WSikafloor-305 W Sika
    water-based matt coloured polyurethane seal coat for ComfortFloor and epoxy systems.
  • Sikafloor-330Sikafloor-330 Sika
    elastic low-VOC polyurethane self-smoothing wearing layer for Sika ComfortFloor systems.
  • TEKNOFLOOR 660FTEKNOFLOOR 660F Teknos
    elastic solvent-free polyurethane floor coating, 0.5–2 mm, bridges cracks up to 1.7 mm.

Impregnations and sealers 6

  • Fosroc Nitoflor LithurinFosroc Nitoflor Lithurin Fosroc
    fluorosilicate hardening and dustproofing treatment for new and old concrete floors.
  • Jotafloor SealerJotafloor Sealer Jotun
    clear two-pack epoxy concrete sealer, dust binder and primer for Jotafloor systems.
  • Jotafloor Sealer WBJotafloor Sealer WB Jotun
    one-pack waterborne acrylic concrete sealer for light-duty pedestrian floors.
  • Mapecrete LI HardenerMapecrete LI Hardener Mapei
    lithium silicate densifier for new and existing concrete floors, including dry-shake toppings.
  • Sikafloor CureHard LISikafloor CureHard LI Sika
    lithium silicate hardener, densifier and dustproofer for new and old concrete.
  • Sikafloor ProSeal WSikafloor ProSeal W Sika
    water-based acrylic curing, dustproofing and sealing compound for concrete floors.

Dry-shake hardeners (toppings) 6

  • Fosroc Nitoflor EmeritopFosroc Nitoflor Emeritop Fosroc
    emery-aggregate dry-shake hardener for fresh concrete, 9 Mohs, minimum 5 kg/m².
  • Fosroc Nitoflor HardtopFosroc Nitoflor Hardtop Fosroc
    quartz dry-shake surface hardener for fresh concrete floors, 3–5 kg/m².
  • Mapetop N AR6Mapetop N AR6 Mapei
    quartz dry-shake surface hardener for fresh concrete, 3–5 kg/m², Böhme class A6.
  • Sikafloor-1 MetalTopSikafloor-1 MetalTop Sika
    metallic dry-shake hardener for heavy-wear floors, AR0.5 and Böhme A1.5.
  • Sikafloor-2 SynTopSikafloor-2 SynTop Sika
    non-metallic synthetic dry-shake hardener for fresh concrete, CT-C70-F7-AR0.5 to EN 13813.
  • Sikafloor-3 QuartzTopSikafloor-3 QuartzTop Sika
    mineral quartz dry-shake hardener for fresh concrete, class AR1, 3–5 kg/m².

Epoxy floors 12

  • Fosroc Nitoflor SL2000Fosroc Nitoflor SL2000 Fosroc
    2 mm flow-applied epoxy floor topping for clean rooms, laboratories and kitchens.
  • Jotafloor CoatingJotafloor Coating Jotun
    solvent-free epoxy floor coating, 200–400 µm per coat, for warehouses and workshops.
  • Jotafloor EP SLJotafloor EP SL Jotun
    solvent-free self-levelling epoxy floor coating, 1.5–5 mm, for industrial areas.
  • Mapecoat EPN 24Mapecoat EPN 24 Mapei
    chemical-resistant epoxy-novolac coating for floors and concrete at chemical plants.
  • Mapefloor I 300 SLMapefloor I 300 SL Mapei
    epoxy resin for 2–4 mm self-levelling and quartz-broadcast slip-resistant floors, Bfl-s1.
  • PPG NU-KLAD SLPPG NU-KLAD SL PPG
    solvent-free self-levelling epoxy floor, 2 mm layer, resistant to hot tyres.
  • Resuflor HBResuflor HB Sherwin-Williams
    high-build epoxy floor coating, 0.2–0.3 kg/m² per coat, Skydrol resistant.
  • Sikafloor-161Sikafloor-161 Sika
    low-viscosity epoxy primer, binder for levelling mortars and screeds, intermediate layer.
  • Sikafloor-2540 WSikafloor-2540 W Sika
    low-emission water-based semi-gloss epoxy floor coating for interior use.
  • Sikafloor-263 SLSikafloor-263 SL Sika
    coloured epoxy resin for 1.5–3 mm self-smoothing and broadcast industrial floors.
  • Sikafloor-264Sikafloor-264 Sika
    two-part coloured epoxy roller coat and seal coat for concrete floors.
  • Sikafloor-81 EpoCemSikafloor-81 EpoCem Sika
    epoxy-cement temporary moisture barrier and self-smoothing screed for damp or green concrete.

Fire protection

Intumescent paints 65

  • CAFCO SprayFilm WB 3 / ISOLATEK Type WB 3 Isolatek
    water-based intumescent coating for exposed interior steel, up to 4 hours.
  • CAFCO SprayFilm WB 7 / ISOLATEK Type WB 7 Isolatek
    water-based intumescent for interior steel, up to 2 hours to BS 476.
  • FIRETEX FX1003 Sherwin-Williams
    single-component solvent-based paint for on-site application, tested to BS 476.
  • FIRETEX FX1007FIRETEX FX1007 Sherwin-Williams
    single-pack solvent-based intumescent for on-site application, up to 60 minutes to EN 13381-8.
  • FIRETEX FX1008FIRETEX FX1008 Sherwin-Williams
    fast-drying solvent-based intumescent paint for on-site application, up to 120 minutes to BS 476.
  • FIRETEX FX2002FIRETEX FX2002 Sherwin-Williams
    single-component solvent-based paint for shop application, assessed to EN 13381-8.
  • FIRETEX FX2008FIRETEX FX2008 Sherwin-Williams
    fast-drying solvent-based intumescent paint for shop application, up to 120 minutes to BS 476.
  • FIRETEX FX5090FIRETEX FX5090 Sherwin-Williams
    water-based thin-film paint for steel in dry interiors; with a topcoat, for more demanding conditions.
  • FIRETEX FX5120FIRETEX FX5120 Sherwin-Williams
    TCEP-free water-based thin-film coating for steel inside buildings, up to 120 minutes.
  • FIRETEX FX6002FIRETEX FX6002 Sherwin-Williams
    very fast-drying three-component coating for shop application.
  • FIRETEX FX6010FIRETEX FX6010 Sherwin-Williams
    two-component ultra-fast-drying intumescent coating for steel, up to 120 minutes.
  • FIRETEX FX7002FIRETEX FX7002 Sherwin-Williams
    single-component solvent-based acrylic paint for steel in dry interiors.
  • FIRETEX FX9502FIRETEX FX9502 Sherwin-Williams
    mesh-free epoxy intumescent coating for exposed steel inside and outside buildings.
  • FIRETEX PlatinumFIRETEX Platinum Sherwin-Williams
    solvent-free epoxy intumescent for steel up to R90 with C5 corrosion protection.
  • HENSOMASTIK B 3000 Rudolf Hensel
    water-based ablative coating upgrading concrete beams and columns up to 120 minutes.
  • HENSOTHERM 421 KS Teknos
    water-based fire protection paint for steel indoors, R15–R150 for open sections and up to R180 for hollow sections.
  • HENSOTHERM 920 KS Teknos
    two-component solvent-free fire protection paint for internal and external use, R30–R120, ETA 21/0475.
  • Interchar 1120 International (AkzoNobel)
    water-based thin-film paint for steel frames inside buildings.
  • Interchar 1150 International (AkzoNobel)
    water-borne acrylic intumescent for interior steel, up to 2 hours to EN 13381-8.
  • Interchar 1160 International (AkzoNobel)
    water-borne intumescent for interior steel, up to 60 minutes to EN 13381-8, CE marked.
  • Interchar 1190 International (AkzoNobel)
    water-borne thin-film intumescent for on-site interior steelwork, up to 2 hours.
  • Interchar 1260 International (AkzoNobel)
    water-borne intumescent for interior steel, up to 90 minutes, CE marked.
  • Interchar 1290 International (AkzoNobel)
    water-borne intumescent for interior hollow steel sections, tested to BS 476.
  • Interchar 2060 International (AkzoNobel)
    single-pack solvent-borne acrylic intumescent for steel, up to 60 minutes in one coat.
  • Interchar 2090 International (AkzoNobel)
    single-pack solvent-borne acrylic intumescent for steel, up to 120 minutes.
  • Interchar 212 International (AkzoNobel)
    modified epoxy coating with enhanced damage resistance.
  • Interchar 3120 International (AkzoNobel)
    epoxy coating for cellulosic fire, for shop application.
  • Interchar 404 International (AkzoNobel)
    CE-marked solvent-borne acrylic intumescent, up to 2 hours to EN 13381-8.
  • Interchar 963 International (AkzoNobel)
    single-pack solvent-borne acrylic paint for shop application.
  • Interchar 973 International (AkzoNobel)
    fast-drying solvent-borne acrylic intumescent for beams and columns, up to 2 hours.
  • Jotun SteelMaster 1200HPE Jotun
    solvent-free epoxy intumescent coating, including for exterior conditions up to C5.
  • Jotun SteelMaster 1200WF Jotun
    water-based thin-film paint for steel, optimised for 120 minutes.
  • Jotun SteelMaster 120SB Jotun
    solvent-borne acrylic intumescent paint for steel, tested to BS 476 and GB 14907.
  • Jotun SteelMaster 120WB Jotun
    water-based intumescent for beams, columns and hollow sections inside buildings, 60–120 minutes.
  • Jotun SteelMaster 600WF Jotun
    water-based thin-film paints optimised for 60, 90 and 120 minutes.
  • Jotun SteelMaster 60SB Jotun
    solvent-borne acrylic paints for steel; fast-drying QD versions are available.
  • Jotun SteelMaster 60SB QD Jotun
    fast-drying solvent-borne acrylic intumescent paint for steel, tested to BS 476.
  • Jotun SteelMaster 60WB Jotun
    water-based thin-film intumescent for interior steel in environments up to C3.
  • Jotun SteelMaster 900WF Jotun
    water-based thin-film paints optimised for 60, 90 and 120 minutes.
  • Jotun SteelMaster 90SB Jotun
    solvent-borne acrylic paints for steel; fast-drying QD versions are available.
  • Jotun SteelMaster 90SB QD Jotun
    fast-drying solvent-borne acrylic intumescent paint for steel, up to 120 minutes.
  • Nullifire SC601Nullifire SC601 Nullifire
    solvent-based intumescent coating for steel, applied on site or off site.
  • Nullifire SC604Nullifire SC604 Nullifire
    off-site solvent-based intumescent for steel, up to 60 minutes, CE to ETA 21/0683.
  • Nullifire SC801Nullifire SC801 Nullifire
    water-based thin-film paint for beams, columns and cellular beams.
  • Nullifire SC802Nullifire SC802 Nullifire
    water-based intumescent coating for internal steelwork, up to 60 minutes.
  • Nullifire SC803Nullifire SC803 Nullifire
    water-based intumescent coating for dry, protected steelwork, optimised for 60 minutes.
  • Nullifire SC804Nullifire SC804 Nullifire
    water-based paint optimised for medium ratings; also used on concrete.
  • Nullifire SC901Nullifire SC901 Nullifire
    fast-curing two-component off-site intumescent for steel, up to 120 minutes in one coat.
  • Nullifire SC902Nullifire SC902 Nullifire
    single-coat, high-build, fast-curing system for shop and site application.
  • PPG STEELGUARD 550PPG STEELGUARD 550 PPG
    solvent-borne intumescent paint for shop and site application, up to 150 minutes.
  • PPG STEELGUARD 651PPG STEELGUARD 651 PPG
    water-based thin-film paint for site application, including in occupied buildings.
  • PPG STEELGUARD 652PPG STEELGUARD 652 PPG
    water-based thin-film intumescent paint for interior steel, up to 120 minutes to UL 263.
  • PPG STEELGUARD 701PPG STEELGUARD 701 PPG
    solvent-based paint for shop and site application.
  • PPG STEELGUARD 751PPG STEELGUARD 751 PPG
    solvent-borne intumescent coating for steel, up to 1500 µm in one coat.
  • PPG STEELGUARD 801PPG STEELGUARD 801 PPG
    fast-drying solvent-borne intumescent coating for shop and site fire protection of steel.
  • PPG STEELGUARD 803PPG STEELGUARD 803 PPG
    fast-drying solvent-borne intumescent paint for I-section beams and columns, up to R45.
  • PPG STEELGUARD 851PPG STEELGUARD 851 PPG
    fast-drying solvent-borne intumescent coating, up to R120 for I-sections and hollow sections.
  • PPG STEELGUARD 864PPG STEELGUARD 864 PPG
    fast-drying solvent-borne intumescent paint, up to 120 minutes, tested to ASTM E119 and NCh-935.
  • PPG STEELGUARD 951PPG STEELGUARD 951 PPG
    epoxy coating for cellulosic fires, including external exposure.
  • PROMAPAINT-SC4PROMAPAINT-SC4 Promat
    water-based intumescent paint for steel I-sections and hollow sections.
  • Protecta Steel Paint FR-1Protecta Steel Paint FR-1 Protecta
    water-based intumescent paint for interior structural steel, R30–R60 to EN 13381-8.
  • Protecta Steel Paint FR-120Protecta Steel Paint FR-120 Protecta
    water-based intumescent paint for interior structural steel, up to R120 to EN 13381-8.
  • Pyroplast ST-100Pyroplast ST-100 Sherwin-Williams
    water-based intumescent for interior steel, up to 90 minutes, DIN 4102-2 approval.
  • Thermo-Lag E100 Carboline
    epoxy coating for commercial and light industrial projects, interior and exterior.
  • Unitherm Steel WB-120Unitherm Steel WB-120 Sherwin-Williams
    fast-drying water-based intumescent for interior steel, R15–R120 to EN 13501-2.

Hydrocarbon fire protection 18

  • Chartek 1620CSP International (AkzoNobel)
    epoxy intumescent for cryogenic spill, hydrocarbon pool and jet fire protection.
  • Chartek 1709 International (AkzoNobel)
    epoxy intumescent coating for hydrocarbon and jet fires.
  • Chartek 1960CSP International (AkzoNobel)
    epoxy intumescent for long cryogenic spills, hydrocarbon pool and jet fires.
  • Chartek 2218 International (AkzoNobel)
    boron-free epoxy intumescent for hydrocarbon pool fire, jet fire and cryogenic spill protection.
  • Chartek 2218E International (AkzoNobel)
    boron-free epoxy intumescent for hydrocarbon pool and jet fires, applicable from −10 °C.
  • Chartek 7 International (AkzoNobel)
    epoxy coating for prolonged pool fires and jet fires.
  • Chartek 7E International (AkzoNobel)
    self-reinforced epoxy intumescent for pool and jet fires up to 2 hours.
  • Chartek 8E International (AkzoNobel)
    boron-free epoxy intumescent for hydrocarbon pool and jet fires on oil and gas facilities.
  • Chartek ONE International (AkzoNobel)
    boron-free, mesh-free epoxy intumescent, up to 3 hours hydrocarbon pool fire.
  • FIRETEX M90/03FIRETEX M90/03 Sherwin-Williams
    epoxy fire protection for steel at oil and gas facilities.
  • Jotun Jotachar 1709 Jotun
    mesh-free epoxy intumescent coating for hydrocarbon and jet fires.
  • Jotun Jotachar 1709 XT Jotun
    epoxy intumescent protecting steel from hydrocarbon pool fires, mesh-free up to 60 minutes.
  • Jotun Jotachar JF750 Jotun
    epoxy fire protection of steel for pool and jet fires.
  • Jotun Jotachar JF750 XT Jotun
    mesh-free epoxy systems for pool and jet fires; XT is for extremely cold climates.
  • PPG PITT-CHAR NXPPG PITT-CHAR NX PPG
    flexible epoxy system for protection against pool fire, jet fire and explosion.
  • PPG PITT-CHAR XP PPG
    flexible epoxy intumescent coating for hydrocarbon pool and jet fires and cryogenic spills.
  • Pyroclad X1 Carboline
    jet-fire-certified epoxy coating for onshore and offshore facilities.
  • Thermo-Lag 3000-P Carboline
    flexible epoxy coating for steel, vessels and cable routes at petrochemical facilities.

Ductwork fire protection 6

Timber fire protection 2

  • Pyroplast Wood PPyroplast Wood P Sherwin-Williams
    white opaque water-based coating for timber and wood-based panels in interiors.
  • Pyroplast Wood T Sherwin-Williams
    clear water-based fire protection system for timber in interiors.

Cable fire protection 11

  • 3M Fire Barrier Pass-Through Device 3M
    re-enterable firestop sleeve device for cables and pipes.
  • HENSOMASTIK 5 KS Rudolf Hensel
    ablative coating preventing flame spread along cables, indoors and outdoors.
  • HENSOMASTIK Acrylic Penetration Seal 2 x 50 mm for CablesHENSOMASTIK Acrylic Penetration Seal 2 x 50 mm for Cables Rudolf Hensel
    coated-board soft seal for cable penetrations, up to EI 120.
  • Hilti CFS-CCHilti CFS-CC Hilti
    firestop cable collar for fully filled penetrations up to 108 mm, EI 120.
  • Hilti CFS-CTHilti CFS-CT Hilti
    fire protection coating for boards and for penetration seals with cables, trays and pipes.
  • Hilti CFS-D 25Hilti CFS-D 25 Hilti
    pre-formed firestop disc for small cable penetrations up to 25 mm.
  • Hilti CFS-THilti CFS-T Hilti
    modular fire-, water- and gas-tight transit system for cables and pipes.
  • Hilti CP 678Hilti CP 678 Hilti
    water-based intumescent coating for cables and cable bundles on trays indoors.
  • Hilti CP 679A PlusHilti CP 679A Plus Hilti
    ablative fire protection coating for cables and trays, indoors and outdoors.
  • PROMATECT-LSPROMATECT-LS Promat
    lightweight calcium silicate board for fire-rated service enclosures and cable protection.
  • Protecta Service Coat FR-1Protecta Service Coat FR-1 Protecta
    water-based intumescent coating for cables, trays and metal pipes, EI 30–EI 120.

Fire stopping of penetrations 59

  • 3M Fire Barrier Moldable Putty Pads MPP+3M Fire Barrier Moldable Putty Pads MPP+ 3M
    intumescent putty for cables and electrical back boxes.
  • 3M Fire Barrier Sealant CP 25WB+3M Fire Barrier Sealant CP 25WB+ 3M
    intumescent sealant for penetration seals.
  • 3M Fire Barrier Water Tight Sealant 1000 NS3M Fire Barrier Water Tight Sealant 1000 NS 3M
    silicone sealant for moving joints and for penetration seals that must also be watertight.
  • HENSOMASTIK 5 KS viskos Rudolf Hensel
    ablative coating over mineral wool for floor movement joints, up to EI 240.
  • HENSOTHERM M 2000HENSOTHERM M 2000 Rudolf Hensel
    fireproof mortar for mixed cable and pipe penetration seals, up to EI 180.
  • Hilti CFS-BHilti CFS-B Hilti
    graphite-based firestop bandage for insulated metal and plastic pipe penetrations.
  • Hilti CFS-BLHilti CFS-BL Hilti
    ready-made fire protection blocks for cable penetration seals.
  • Hilti CFS-C ELHilti CFS-C EL Hilti
    endless firestop collar cut on site for plastic pipes 16–160 mm.
  • Hilti CFS-C PHilti CFS-C P Hilti
    fire protection collar for plastic pipes.
  • Hilti CFS-CIDHilti CFS-CID Hilti
    cast-in firestop device for 32–160 mm pipes in concrete floors.
  • Hilti CFS-CUHilti CFS-CU Hilti
    fire protection pillows for temporary and permanent penetration seals.
  • Hilti CFS-F FXHilti CFS-F FX Hilti
    fire-stopping foam for cable and mixed penetrations.
  • Hilti CFS-PLHilti CFS-PL Hilti
    reusable firestop plug for round cable openings in walls and floors.
  • Hilti CFS-S ACRHilti CFS-S ACR Hilti
    acrylic fire protection sealant for joints and metal pipe penetrations.
  • Hilti CFS-SL GAHilti CFS-SL GA Hilti
    firestop sleeve for cable penetrations with twist-to-close smoke seal, up to EI 180.
  • Hilti CFS-SP SILHilti CFS-SP SIL Hilti
    silicone firestop joint spray for slab-edge curtain wall perimeter joints, EI 180.
  • Hilti CFS-SP WBHilti CFS-SP WB Hilti
    sprayable water-based acrylic firestop coating for joints and curtain wall perimeters.
  • Hilti CFS-TTS EHilti CFS-TTS E Hilti
    preformed head-of-wall seal for drywall partitions, EI 120, joints up to 25 mm.
  • Hilti CFS-W SGHilti CFS-W SG Hilti
    pre-cut intumescent wrap strips for plastic pipe penetrations up to 160 mm.
  • Hilti CP 601S Hilti
    elastic silicone sealant for movement joints and metal pipe penetrations.
  • Hilti CP 611A Hilti
    intumescent acrylic mastic for cable and pipe penetrations.
  • Hilti CP 618Hilti CP 618 Hilti
    non-hardening firestop putty stick for cables and metal pipes, up to 3 hours.
  • Hilti CP 636Hilti CP 636 Hilti
    firestop mortar for medium and large openings with cables, trays and pipes.
  • Hilti CP 680-PHilti CP 680-P Hilti
    cast-in firestop device for plastic pipe penetrations through concrete floors.
  • Nullifire FB750 IntubattNullifire FB750 Intubatt Nullifire
    coated mineral wool board for reinstating the fire resistance of walls and floors.
  • Nullifire FF197Nullifire FF197 Nullifire
    fire-rated polyurethane foam for linear gaps and door frames.
  • Nullifire FJ203Nullifire FJ203 Nullifire
    non-combustible rock fibre rope for static and movement joints up to 150 mm.
  • Nullifire FP170 IntucollarNullifire FP170 Intucollar Nullifire
    stainless steel intumescent pipe collar for combustible pipes, up to 4 hours.
  • Nullifire FP220 Service SleeveNullifire FP220 Service Sleeve Nullifire
    stainless steel intumescent sleeve for combustible pipes in walls, up to 2 hours.
  • Nullifire FP302 IntustrapNullifire FP302 Intustrap Nullifire
    graphite intumescent pipe wrap for combustible and insulated pipes, up to 4 hours.
  • Nullifire FR230 IntucompoundNullifire FR230 Intucompound Nullifire
    gypsum-based fire-stopping mortar for wall and floor penetrations, up to 4 hours.
  • Nullifire FS702 IntumasticNullifire FS702 Intumastic Nullifire
    fire-rated acrylic sealant for joints and penetrations.
  • Nullifire FS703Nullifire FS703 Nullifire
    fire-rated silicone sealant for linear joints in walls and floors.
  • Nullifire FS704Nullifire FS704 Nullifire
    hybrid fire-resistant sealant for linear joints, up to 2 hours, 25 % movement.
  • Nullifire FS709 HPNullifire FS709 HP Nullifire
    graphite intumescent sealant for pipe and cable penetrations, up to 4 hours.
  • Nullifire FS719 HP BlueNullifire FS719 HP Blue Nullifire
    blue graphite sealant for CPVC sprinkler pipe penetrations, up to 2 hours.
  • Nullifire FV225Nullifire FV225 Nullifire
    open-state cavity barrier for ventilated rainscreen facades, air gap up to 25 mm.
  • Nullifire FZ100 Fire Safe ZoneNullifire FZ100 Fire Safe Zone Nullifire
    graphite foam slab for planned and future service penetrations, up to 120 minutes.
  • Nullifire FZ400Nullifire FZ400 Nullifire
    compressible graphite filler for movement joints and cable trunking, up to 2 hours.
  • PROMASEAL-AGPROMASEAL-AG Promat
    intumescent acrylic sealant for cables, bundles and conduits.
  • PROMASTOP-CCPROMASTOP-CC Promat
    water-based “hybrid” coating for cable and mixed penetration seals.
  • PROMASTOP-FC MDPROMASTOP-FC MD Promat
    cut-to-size fire stopping collar for plastic pipes from 40 to 200 mm.
  • PROMASTOP-IPROMASTOP-I Promat
    water-based intumescent coating for cable and pipe penetration seals with mineral wool batts.
  • PROMASTOP-MPROMASTOP-M Promat
    cement-based fire-stopping mortar for cable and pipe penetrations, up to EI 120.
  • PROMASTOP-WPROMASTOP-W Promat
    intumescent wrap for plastic and insulated pipe penetrations, up to EI 120.
  • Protecta EX MortarProtecta EX Mortar Protecta
    fast-setting gypsum-based mortar for floor and wall penetration seals, up to EI 240.
  • Protecta FR AcrylicProtecta FR Acrylic Protecta
    intumescent acrylic sealant for penetrations and 10–30 mm joints, EI 30–EI 240.
  • Protecta FR BoardProtecta FR Board Protecta
    coated stone wool batt for large openings with multiple services, up to EI 240.
  • Protecta FR CoatingProtecta FR Coating Protecta
    ablative coating for stone wool in the FR Board system, up to EI 240.
  • Protecta FR CollarProtecta FR Collar Protecta
    graphite-lined steel firestop collar for plastic pipes up to Ø400 mm, EI 240.
  • Protecta FR CPVC SealantProtecta FR CPVC Sealant Protecta
    acrylic firestop sealant for CPVC sprinkler pipe penetrations up to Ø73 mm, EI 180.
  • Protecta FR FoamProtecta FR Foam Protecta
    fire-rated PU foam for linear joints in concrete and masonry walls, EI 30–EI 240.
  • Protecta FR GraphiteProtecta FR Graphite Protecta
    graphite intumescent sealant for plastic pipe and cable penetrations, up to EI 240.
  • Protecta FR Graphite PlateProtecta FR Graphite Plate Protecta
    self-adhesive graphite plate for electrical wall boxes in drywalls, EI 30–EI 120.
  • Protecta FR IPTProtecta FR IPT Protecta
    elastic IPT sealant-adhesive for joints and penetrations, 25 % movement, up to EI 240.
  • Protecta FR Pipe WrapProtecta FR Pipe Wrap Protecta
    graphite intumescent wrap for plastic pipe penetrations up to Ø400 mm, EI 240.
  • Protecta FR Putty Cord / FR Putty PadProtecta FR Putty Cord / FR Putty Pad Protecta
    non-setting putty: cord for small annular gaps and pads for socket boxes, EI 240.
  • Protecta FR Service TransitProtecta FR Service Transit Protecta
    firestop sleeve for cables and pipes that allows later re-cabling, up to EI 240.
  • ROCKWOOL Conlit Pipe CollarROCKWOOL Conlit Pipe Collar ROCKWOOL
    intumescent pipe collar for 110–250 mm plastic pipes in walls and floors.

Fire protection boards and mats 12

  • 3M Interam Endothermic Mat E-54A 3M
    endothermic wrap mat protecting structural steel, cables and cable trays.
  • AESTUVER TxAESTUVER Tx AESTUVER
    glass-fibre reinforced lightweight concrete board protecting tunnel linings, RWS and HCM curves.
  • Promat VERMICULUX-SPromat VERMICULUX-S Promat
    calcium silicate board for boxed fire protection of steel beams and columns, 240 min.
  • PROMATECT-100 Promat
    non-combustible calcium silicate board for fire-rated ceilings, walls, shafts and protective membranes.
  • PROMATECT-200PROMATECT-200 Promat
    calcium silicate board for boxed fire protection of steel structures and cable ducts.
  • PROMATECT-250PROMATECT-250 Promat
    calcium silicate board for fire protection casings of steel columns and beams, R15–R120.
  • PROMATECT-HPROMATECT-H Promat
    calcium silicate boards for encasing steel and lining concrete.
  • PROMATECT-T Promat
    fire protection board for tunnel linings and concrete structures, up to RWS curve.
  • PROMATECT-TF-X Promat
    monolithic calcium silicate board for tunnel linings, RWS and MOAC curves.
  • PROMATECT-XSPROMATECT-XS Promat
    non-combustible A1 board for encasing steel columns and beams, up to 60 minutes.
  • ROCKWOOL Conlit 150ROCKWOOL Conlit 150 ROCKWOOL
    rigid stone wool boards for fire protection of load-bearing structural steel.
  • ROCKWOOL Conlit Steelprotect SectionROCKWOOL Conlit Steelprotect Section ROCKWOOL
    stone wool fire protection sections for round steel columns and sprinkler pipes.

Fire protection plasters 18

  • CAFCO 300 / ISOLATEK Type 300 Isolatek
    spray-applied gypsum fire protection for commercial construction.
  • CAFCO 400 / ISOLATEK Type 400 Isolatek
    medium-density cementitious spray fireproofing for steel and concrete, up to 4 hours.
  • CAFCO BLAZE-SHIELD HP / ISOLATEK Type HP Isolatek
    medium-density cementitious spray fireproofing, up to 4 hours.
  • CAFCO BLAZE-SHIELD II / ISOLATEK Type II Isolatek
    dry-mix cementitious spray fireproofing for steel and concrete, up to 4 hours.
  • PerlifocPerlifoc Perlita y Vermiculita
    gypsum-based plasters with perlite and vermiculite for steel, concrete and metal decks.
  • Perlifoc HPPerlifoc HP Perlita y Vermiculita
    gypsum-based plasters with perlite and vermiculite for steel, concrete and metal decks.
  • Perlifoc HP Eco+Perlifoc HP Eco+ Perlita y Vermiculita
    gypsum-based plasters with perlite and vermiculite for steel, concrete and metal decks.
  • Perlifoc T Perlita y Vermiculita
    cementitious plaster for the fire protection of concrete in tunnels.
  • PROMASPRAY-F250PROMASPRAY-F250 Promat
    lightweight dry-sprayed mineral fibre fire protection for steel, concrete and timber floors.
  • PROMASPRAY-P300PROMASPRAY-P300 Promat
    vermiculite-gypsum plaster for steel and concrete inside buildings.
  • Promat FENDOLITE MII (Cafco FENDOLITE MII)Promat FENDOLITE MII (Cafco FENDOLITE MII) Promat
    spray-applied cement-vermiculite coating for steel, spheres, tanks and concrete.
  • Pyrocrete 239Pyrocrete 239 Carboline
    medium-density cementitious fire protection for steel and concrete.
  • Pyrocrete 241Pyrocrete 241 Carboline
    cementitious fire protection for steel in heavy industry.
  • Pyrocrete 241 HY Carboline
    cementitious fire protection for hydrocarbon and jet fires at oil and gas facilities.
  • Pyrocrete 341 Carboline
    cementitious fire protection for hydrocarbon and jet fires at oil and gas facilities.
  • Pyrocrete 40Pyrocrete 40 Carboline
    cementitious fire protection for hydrocarbon and jet fires at oil and gas facilities.
  • Pyrocrete 60 Carboline
    lightweight cementitious fire protection for steel and concrete, indoors and outdoors.
  • Sikacrete-213 F Sika
    cementitious fire protection mortar for concrete and tunnels, wet spray or hand applied.

Grouts

Anchoring 47

  • Chockfast Gray ITW (Chockfast)
    epoxy compound, also used for setting anchor bolts in concrete.
  • Euco Cable Grout PTX Euclid Chemical
    thixotropic cementitious grout for post-tensioning cable ducts.
  • Euco Rapid Grout Euclid Chemical
    rapid-setting non-shrink grout for anchoring and structural grouting, placed from 2 °C.
  • Five Star Fluid EpoxyFive Star Fluid Epoxy Five Star Products
    fluid epoxy for anchor bolts and low-clearance grouting from 3 mm.
  • Five Star Special Grout 400Five Star Special Grout 400 Five Star Products
    fluid cementitious grout for post-tensioning tendon ducts and cables.
  • Fosroc Conbextra Cable Grout Fosroc
    non-shrink cementitious grout for post-tensioning tendon ducts, 60 MPa at 28 days.
  • Fosroc Conbextra Cable Grout HSFosroc Conbextra Cable Grout HS Fosroc
    high-strength non-shrink grout for post-tensioning cable ducts.
  • Fosroc Conbextra LCFosroc Conbextra LC Fosroc
    non-shrink cementitious slurry for injection, cable anchoring and micropiles.
  • Fosroc Lokfix Fosroc
    pourable polyester anchoring resin for bolts and rebar in concrete, masonry and rock.
  • Fosroc Lokfix DUR Fosroc
    epoxy acrylate cartridge anchoring resin for M8–M24 rods in concrete and stone.
  • Fosroc Lokfix E35SFosroc Lokfix E35S Fosroc
    polyester anchoring resin in cartridges for uncracked concrete and masonry.
  • Fosroc Lokfix E45TFosroc Lokfix E45T Fosroc
    vinyl ester anchoring resin in cartridges for hot climates.
  • Fosroc Lokfix E55Fosroc Lokfix E55 Fosroc
    styrene-free vinyl ester anchoring resin for rebar and rods, installed from −20 °C.
  • Fosroc Lokfix E77Fosroc Lokfix E77 Fosroc
    3:1 epoxy anchoring system for rebar and threaded rods in cracked concrete.
  • Fosroc Lokfix EPFosroc Lokfix EP Fosroc
    thixotropic epoxy anchoring grout for threaded rods and rebar in concrete.
  • Fosroc Lokfix RA Fosroc
    pourable polyester resin grout for anchoring bolts and bars into rock.
  • Hilti HIT-CT 100Hilti HIT-CT 100 Hilti
    hazard-label-free injection mortar for anchor rods and rebar, installed from −5 °C.
  • Hilti HIT-FP 700 RHilti HIT-FP 700 R Hilti
    mineral injection mortar for rebar φ8–φ40, service up to 160 °C.
  • Hilti HIT-HY 170Hilti HIT-HY 170 Hilti
    injection mortar for anchor rods, sleeves and rebar in concrete, installed from −5 °C.
  • Hilti HIT-HY 200-A V3Hilti HIT-HY 200-A V3 Hilti
    fast-curing injection mortar for anchors and post-installed rebar in concrete.
  • Hilti HIT-HY 270Hilti HIT-HY 270 Hilti
    hybrid injection mortar for anchoring in solid and hollow masonry.
  • Hilti HIT-MM PLUSHilti HIT-MM PLUS Hilti
    hybrid injection mortar for anchors in non-cracked concrete and masonry.
  • Hilti HIT-RE 10Hilti HIT-RE 10 Hilti
    epoxy injection mortar for threaded rods and rebar in non-cracked concrete.
  • Hilti HIT-RE 100-HCHilti HIT-RE 100-HC Hilti
    epoxy mortar for post-installed rebar φ8–φ40 up to 1500 mm deep.
  • Hilti HIT-RE 500 V4Hilti HIT-RE 500 V4 Hilti
    epoxy injection mortar for anchors and post-installed rebar, including in water-filled holes.
  • Hilti HVU2 Hilti
    foil adhesive capsule anchor for M8–M30 rods in cracked and uncracked concrete.
  • Mapefix PE SFMapefix PE SF Mapei
    styrene-free polyester chemical anchor for non-cracked concrete and hollow masonry.
  • Mapefix VE SFMapefix VE SF Mapei
    styrene-free vinyl ester chemical anchor, also suitable for fixing rails and supports.
  • Mapegrout HF WMapegrout HF W Mapei
    non-shrink anchoring and grouting mortar for −10…+15 °C, layers up to 50 mm.
  • MasterFlow 920 AN Sika
    epoxy acrylate anchor resin for rebar and foundation bolts.
  • PAGEL E1, E1-P Pagel
    flowable and plastic anchor mortars for rock, soil, concrete and masonry.
  • Planigrout ARPlanigrout AR Mapei
    unsanded thixotropic cementitious grout for injecting anchors and cables into rock and soil.
  • Planigrout PTPlanigrout PT Mapei
    non-shrink cementitious grout for injecting post-tensioning tendon ducts.
  • Sika AnchorFix S Sika
    fast-curing polyester anchoring adhesive for concrete, masonry and stone.
  • Sika AnchorFix-1 Sika
    fast-curing polyester anchoring adhesive for concrete and masonry, installed from −10 °C.
  • Sika AnchorFix-2Sika AnchorFix-2 Sika
    fast-curing epoxy acrylate anchoring adhesive for threaded rods and rebar.
  • Sika AnchorFix-2020Sika AnchorFix-2020 Sika
    anchoring adhesive for cracked and uncracked concrete, installed from −10 °C.
  • Sika AnchorFix-3+ Sika
    epoxy anchoring adhesive for rebar, studs and bolts.
  • Sika AnchorFix-3001Sika AnchorFix-3001 Sika
    epoxy anchoring adhesive for threaded rods and rebar in cracked concrete.
  • Sika AnchorFix-3030 Sika
    epoxy anchoring adhesive for cracked and uncracked concrete, seismic C1/C2.
  • Sika AnchorFix-500Sika AnchorFix-500 Sika
    1:1 adhesive anchoring system for threaded rods and rebar in uncracked concrete.
  • Sikadur-42 Grout-Pak PTSikadur-42 Grout-Pak PT Sika
    pre-proportioned epoxy system protecting post-tensioning tendon anchorages.
  • SikaGrout Cable PT Sika
    sand-free non-shrink cementitious grout for post-tensioning ducts.
  • SikaGrout-110 ANSikaGrout-110 AN Sika
    rapid-setting anchoring cement for bolts, posts, railings and base grouting.
  • SikaGrout-190 Sika
    shrinkage-compensated fluid grout for post-tensioning ducts and anchors.
  • SikaGrout-300 PTSikaGrout-300 PT Sika
    sand-free injection grout for narrow gaps and voids.
  • SikaGrout-960SikaGrout-960 Sika
    rapid-setting cementitious anchoring compound for threaded rods and rebar, installed from −5 °C.

Crane rails 6

  • Chockfast Red SG ITW (Chockfast)
    fast-curing grout for thin gaps, including under crane rails.
  • Five Star Elastomeric GroutFive Star Elastomeric Grout Five Star Products
    elastomeric polyurethane rail grout that dampens vibration and noise.
  • Five Star LC Epoxy GroutFive Star LC Epoxy Grout Five Star Products
    high-flow epoxy grout for crane rails and clearances from 10 mm.
  • PAGEL EH196R Pagel
    epoxy grouts for rails and precision supports.
  • Planigrout 310Planigrout 310 Mapei
    fast-curing medium-thickness grout for compressors, presses, and crane and tram rails.
  • Sikadur-42Sikadur-42 Sika
    grout for machinery, baseplates and crane rails.

Wind turbine grouts 25

  • Ducorit A2G ITW (Densit)
    class C70/85, fine-grained, layer 10–150 mm, for steel tower flanges and concrete tower joints.
  • Ducorit D4 ITW (Densit)
    ultra-high-strength grout for wind turbine foundation and oil and gas structural connections.
  • Ducorit R5G ITW (Densit)
    class C100/115, 120 MPa at 28 days, layer 50–350 mm.
  • Ducorit S1 ITW (Densit)
    high-strength grout for wind turbine foundation and offshore structural connections.
  • Ducorit S2 ITW (Densit)
    very-high-strength grout for wind turbine and oil and gas foundation connections.
  • Ducorit S5 ITW (Densit)
    ultra-high-strength grout for wind turbine foundation and offshore structural connections.
  • Ducorit S5R ITW (Densit)
    class C110/125 for structural connections in onshore and offshore foundations.
  • Ducorit S8 ITW (Densit)
    supplied in bulk with pneumatic transfer, at least 90 MPa, layer 30–700 mm.
  • Five Star XP 250 Epoxy Grout (Wind)Five Star XP 250 Epoxy Grout (Wind) Five Star Products
    172.4 MPa (25 000 psi) at 28 days, pour depth 50.8–457.2 mm (2–18 in) in a single lift.
  • Fosroc Conbextra BB72-INFosroc Conbextra BB72-IN Fosroc
    free-flow non-shrink grout for joints of precast wind turbine towers.
  • Fosroc Conbextra BB92Fosroc Conbextra BB92 Fosroc
    for structural connections in onshore foundations and concrete segment towers, at least 90 MPa at 28 days, gap 10–150 mm.
  • Fosroc Conbextra SG Fosroc
    for Siemens wind turbine foundations, class C80/95, gap 25–150 mm.
  • Fosroc Conbextra TAFosroc Conbextra TA Fosroc
    for tower foundations onshore and in the tidal zone, class C100/115, layer 25–400 mm.
  • Fosroc Conbextra VG Fosroc
    for Vestas wind turbine foundations, class C100/115, gap 25–400 mm.
  • Mapefill 130 WTMapefill 130 WT Mapei
    high-flow non-shrink mortar for anchoring onshore wind turbine baseplates, 130 MPa.
  • Mapegrout WT-SMapegrout WT-S Mapei
    ultra-high-strength cementitious grout for onshore wind turbine flanges and anchor bolts.
  • PAGEL HF50 Pagel
    class C100/115, at least 115 MPa at 28 days; its listed uses include wind turbine grouting.
  • PAGEL V1/30HF, V1/60HF, V1/0HF Pagel
    ultra-high-strength grouts of class C100/115 for steel tower segments, at least 60 MPa after one day, application from +0.5 °C.
  • SikaGrout-3320SikaGrout-3320 Sika
    fatigue-certified, with a reduced carbon footprint, 115 MPa at 28 days, layer 20–500 mm.
  • SikaGrout-3350SikaGrout-3350 Sika
    rapid-hardening, fatigue-certified, approx. 120 MPa at 28 days, layer 20–500 mm.
  • SikaGrout-9300 Sika
    formerly MasterFlow 9300; with metallic aggregate for increased ductility, at least 120 MPa at 28 days, layer 30–200 mm.
  • SikaGrout-9370 Sika
    formerly MasterFlow 9370; for anchor cage foundations, class C80/95, layer 25–250 mm, application from +2 to +40 °C.
  • SikaGrout-9500SikaGrout-9500 Sika
    formerly MasterFlow 9500; DNV-certified, at least 135 MPa at 28 days, layer 25–600 mm, placing from 0 °C.
  • SikaGrout-9650 Sika
    formerly MasterFlow 9650; supplied in bulk, class C60/75, layer 50–1000 mm.
  • SikaGrout-9800 Sika
    formerly MasterFlow 9800; for pile-to-sleeve connections, class C90/105, layer 30–600 mm.

Cementitious grouts 111

  • Euclid Dry Pack Grout Euclid Chemical
    non-shrink dry-pack cementitious grout placed by ramming.
  • Euclid Hi-Flow Grout Euclid Chemical
    high-flow non-shrink cementitious grout for machinery, columns and crane rails.
  • Euclid Hi-Flow Metallic Grout Euclid Chemical
    high-flow metallic-aggregate cementitious grout for heavy machinery and crane rails.
  • Euclid NC Grout Euclid Chemical
    non-corrosive non-shrink cementitious grout, from plastic to fluid consistency.
  • Euclid NS Grout Euclid Chemical
    non-shrink non-metallic cementitious grout for machinery, pumps and anchor bolts.
  • Euclid Tammsgrout Supreme Euclid Chemical
    high-strength non-shrink cementitious grout for heavy machinery and crane rails.
  • Euco Pre-Cast Grout Euclid Chemical
    fast-setting non-shrink grout for precast concrete panels and structural supports.
  • Euco Tremie Grout Euclid Chemical
    non-shrink cementitious grout for underwater placement with an anti-washout additive.
  • Five Star Cementitious Underwater High-Strength GroutFive Star Cementitious Underwater High-Strength Grout Five Star Products
    non-shrink cementitious grout for underwater placement and pile jackets.
  • Five Star Fluid Grout 100Five Star Fluid Grout 100 Five Star Products
    fluid sulphate-resistant cementitious grout.
  • Five Star GroutFive Star Grout Five Star Products
    non-shrink grouts to ASTM C1107.
  • Five Star High Strength 130 GroutFive Star High Strength 130 Grout Five Star Products
    flowable high-strength cementitious grout, 90 MPa, pumpable over long distances.
  • Five Star High Strength GroutFive Star High Strength Grout Five Star Products
    high-strength cementitious grout for machinery and turbo equipment, 89.6 MPa.
  • Five Star HTR GroutFive Star HTR Grout Five Star Products
    cementitious grout for equipment operating at up to 1316 °C.
  • Five Star Hybrid GroutFive Star Hybrid Grout Five Star Products
    sulfate-resistant high-flow cementitious grout, placed from 2 to 38 °C.
  • Five Star Instant GroutFive Star Instant Grout Five Star Products
    rapid-strength cementitious grout reaching 27.6 MPa in 4 hours.
  • Five Star Metallic GroutFive Star Metallic Grout Five Star Products
    metallic-aggregate cementitious grout for machinery under impact and vibration.
  • Five Star NSG GroutFive Star NSG Grout Five Star Products
    general-purpose non-shrink cementitious grout, from dry pack to flowable consistency.
  • Fosroc Conbextra 621Fosroc Conbextra 621 Fosroc
    dual-expansion non-shrink precision grout for turbines, presses and rails.
  • Fosroc Conbextra ATFosroc Conbextra AT Fosroc
    high-strength non-shrink grout for bridge bearings and parapet posts.
  • Fosroc Conbextra AT+Fosroc Conbextra AT+ Fosroc
    high-strength non-shrink grout for bridge bearings and machine baseplates.
  • Fosroc Conbextra BB Fosroc
    non-shrink cementitious grout for bridge bearings, parapet posts and lighting columns.
  • Fosroc Conbextra BB80 Fosroc
    high-strength non-shrink grout for bridge bearings and heavy column bases, 85 MPa.
  • Fosroc Conbextra GPFosroc Conbextra GP Fosroc
    non-shrink grout for anchor bolts and column baseplates.
  • Fosroc Conbextra GP1Fosroc Conbextra GP1 Fosroc
    general-purpose non-shrink free-flow cementitious grout for static loads.
  • Fosroc Conbextra GP2Fosroc Conbextra GP2 Fosroc
    non-shrink cementitious grout for turbines, compressors and pumps.
  • Fosroc Conbextra GP2(N)Fosroc Conbextra GP2(N) Fosroc
    free-flow non-shrink grout for turbines, compressors and anchor bolts.
  • Fosroc Conbextra GP3Fosroc Conbextra GP3 Fosroc
    high-strength non-shrink precision grout with dual shrinkage compensation.
  • Fosroc Conbextra GP4Fosroc Conbextra GP4 Fosroc
    high-strength non-shrink precision grout for turbines, compressors and pumps.
  • Fosroc Conbextra GP5Fosroc Conbextra GP5 Fosroc
    ultra-high-strength non-shrink cementitious grout for heavy-duty equipment.
  • Fosroc Conbextra GPA Fosroc
    non-shrink aggregate-filled cementitious grout for thick 50–200 mm gaps.
  • Fosroc Conbextra GPXtraFosroc Conbextra GPXtra Fosroc
    high-strength non-shrink grout for column baseplates and anchoring.
  • Fosroc Conbextra GVFosroc Conbextra GV Fosroc
    low-exotherm self-levelling grout for 70–150 mm gaps under machine beds.
  • Fosroc Conbextra GV08Fosroc Conbextra GV08 Fosroc
    non-shrink grout with 8 mm aggregate for pours thicker than 150 mm.
  • Fosroc Conbextra HESFosroc Conbextra HES Fosroc
    rapid-setting non-shrink grout for urgent works and railing fixing.
  • Fosroc Conbextra HFFosroc Conbextra HF Fosroc
    high-flow cementitious grout for precision work.
  • Fosroc Conbextra HRFosroc Conbextra HR Fosroc
    heat-resistant non-shrink grout for blast furnaces and hot equipment.
  • Fosroc Conbextra HSFosroc Conbextra HS Fosroc
    ultra-high-strength grout for machinery and crane rails.
  • Fosroc Conbextra HTFosroc Conbextra HT Fosroc
    rapid-strength heat-resistant cementitious grout up to 400 °C for hot works.
  • Fosroc Conbextra MFFosroc Conbextra MF Fosroc
    fine-aggregate non-shrink precision grout for gaps up to 70 mm.
  • Fosroc Conbextra P Fosroc
    pumpable non-shrink cementitious grout for narrow 5–40 mm gaps.
  • Fosroc Conbextra PM Fosroc
    thixotropic pumpable cementitious mortar for gaps in precast units and tunnel anchors.
  • Fosroc Conbextra SSFosroc Conbextra SS Fosroc
    multi-purpose non-shrink grout for precast bedding and void filling.
  • Fosroc Conbextra STD Fosroc
    general-purpose non-shrink cementitious grout for 10–100 mm gaps under baseplates.
  • Fosroc Conbextra Sureflow 100 Fosroc
    high-flow cementitious grout with dual shrinkage compensation for 10–100 mm gaps.
  • Fosroc Conbextra Sureflow 120Fosroc Conbextra Sureflow 120 Fosroc
    free-flow non-shrink R4 class grout for layers up to 120 mm.
  • Fosroc Conbextra TS Fosroc
    non-shrink aggregate-filled grout for thick sections, voids and anchor pockets.
  • Fosroc Conbextra UHSFosroc Conbextra UHS Fosroc
    ultra-high-strength flowable grout with dual shrinkage compensation, 10–150 mm.
  • Fosroc Conbextra UWFosroc Conbextra UW Fosroc
    washout-resistant non-shrink grout for underwater and tidal-zone placement.
  • MapefillMapefill Mapei
    high-flow expansive mortar for grouting under machine tools and steel structures.
  • Mapefill 10Mapefill 10 Mapei
    non-shrink flowable concrete grout with 10 mm aggregate for grouting under machinery.
  • Mapefill 318Mapefill 318 Mapei
    pumpable multi-purpose non-shrink grout for anchoring and machine baseplates.
  • Mapefill FMapefill F Mapei
    sulphate-resistant fluid cementitious grout for precision anchoring of machine tools and steel structures.
  • Mapefill GPMapefill GP Mapei
    general-purpose non-shrink grout.
  • Mapefill GP PlusMapefill GP Plus Mapei
    fluid non-shrink grout for precision anchoring of machinery and steel structures.
  • Mapefill HESMapefill HES Mapei
    rapid-setting structural grout reaching 25 MPa in 2 hours, 10–200 mm layers.
  • Mapefill HSMapefill HS Mapei
    super-flow high-strength non-shrink grout for precision anchoring of equipment.
  • Mapefill MF 610Mapefill MF 610 Mapei
    fibre-reinforced expansive grout for precision anchoring of equipment in layers over 5 cm.
  • Mapefill RMapefill R Mapei
    rapid-hardening expansive mortar for anchor bolts.
  • Mapefill SPMapefill SP Mapei
    super-flow non-shrink grout for precision anchoring of machinery in 10–100 mm layers.
  • PAGEL HF10 Pagel
    ultra-high-strength fine grout, class C100/115, for joints and cavities.
  • PAGEL V1/10 Pagel
    pourable grouts in different aggregate sizes, including grades for wind turbines.
  • PAGEL V1/50 Pagel
    pourable grouts in different aggregate sizes, including grades for wind turbines.
  • PAGEL V1/50HF Pagel
    class C90/105 for wind energy installations and precast elements.
  • PAGEL V1/50SF Pagel
    steel-fibre grout for rail supports and heavy foundations.
  • PAGEL V1/80 Pagel
    0–8 mm aggregate grout for machinery and columns, 30–200 mm gaps.
  • PAGEL V14 (V14/10, V14/40, V14/80) Pagel
    plastic mortars for packing under baseplates.
  • PAGEL V15 (V15/50, V15/50SF) Pagel
    basalt-aggregate grout for heavily vibrating machinery and crane rails.
  • PAGEL V2 (V2/20, V2/50, V2/160) Pagel
    quick-setting grout reaching at least 15 MPa in 2 hours.
  • PAGEL V80C45, V160C45 Pagel
    concrete grout for large volumes and deep pours up to 400 mm.
  • PAGEL VB (VB20, VB50, VB160) Pagel
    rapid-setting grout loadable after 30 minutes, at least 15 MPa in 2 hours.
  • Planigrout 712Planigrout 712 Mapei
    non-shrink non-metallic silica-fume cementitious grout for structural grouting and anchoring.
  • Planigrout 728Planigrout 728 Mapei
    non-shrink precision cementitious grout for base plates and anchor bolts.
  • Planigrout 740Planigrout 740 Mapei
    non-shrink underwater tremie grout for bridge piers, piles and harbour walls.
  • Planigrout 755Planigrout 755 Mapei
    general-purpose cementitious grout for base plates, anchors and precast members.
  • SikaEmaco T 1200 PGSikaEmaco T 1200 PG Sika
    non-shrink flowable concrete for rapid repair and grouting down to −10 °C.
  • SikaGrout-105 Sika
    economical general-purpose non-shrink grout for 10–75 mm layers.
  • SikaGrout-114 Sika
    dual-expansion non-shrink grout for machine foundations and baseplates.
  • SikaGrout-212SikaGrout-212 Sika
    general-purpose shrinkage-compensated flowable grout, class R4 to EN 1504-3.
  • SikaGrout-212 RUSikaGrout-212 RU Sika
    high-flow expanding cementitious mortar for grouting and repair, 10–60 mm layers.
  • SikaGrout-214SikaGrout-214 Sika
    non-shrink grout with two-stage expansion for turbines, compressors and pumps.
  • SikaGrout-214 IN Sika
    non-shrink grout with two-stage expansion for turbines, compressors and pumps.
  • SikaGrout-215SikaGrout-215 Sika
    pumpable non-shrink grout with two-stage expansion for machine foundations and anchors.
  • SikaGrout-275 Sika
    high-strength non-shrink precision grout for machinery, layers up to 100 mm.
  • SikaGrout-295 US Sika
    high-strength fluid expanding cementitious grout for baseplates and machinery.
  • SikaGrout-311SikaGrout-311 Sika
    expanding cementitious grout for thin 3–10 mm gaps under equipment and in joints.
  • SikaGrout-314SikaGrout-314 Sika
    non-shrink flowable grouts for machinery, baseplates and anchors.
  • SikaGrout-316SikaGrout-316 Sika
    rapid-hardening pourable grout for equipment, columns and concrete repair, 20–120 mm layers.
  • SikaGrout-318SikaGrout-318 Sika
    non-shrink flowable grouts for machinery, baseplates and anchors.
  • SikaGrout-3200SikaGrout-3200 Sika
    rapid-hardening grout for tower joints and baseplates, approx. 90 MPa at 28 days, layer 10–200 mm.
  • SikaGrout-328 Sika
    non-shrink cementitious grout with extended working time, from dry pack to fluid.
  • SikaGrout-340 TR Sika
    high-strength non-shrink grout for equipment, baseplates and anchoring, 10–300 mm layers.
  • SikaGrout-350SikaGrout-350 Sika
    non-shrink cementitious grout for deep pours up to 300 mm under equipment.
  • SikaGrout-4 N Sika
    self-levelling expanding cementitious mortar for equipment grouting and anchoring.
  • SikaGrout-4 UW Sika
    shrinkage-compensated grout for underwater and tidal-zone placement.
  • SikaGrout-428 FSSikaGrout-428 FS Sika
    fast-setting non-shrink ViscoCrete cementitious precision grout.
  • SikaGrout-4316SikaGrout-4316 Sika
    precision grout with a hydraulic binder; according to the manufacturer, fatigue-tested to DNV ST C502 for wind turbine grouts.
  • SikaGrout-4800SikaGrout-4800 Sika
    ultra-high-strength metallic-aggregate grout for machinery under impact loads.
  • SikaGrout-500 AquaSikaGrout-500 Aqua Sika
    non-shrink cementitious grout for underwater and tidal-zone placement.
  • SikaGrout-520 Sika
    general-purpose free-flow non-shrink grout for layers up to 80 mm.
  • SikaGrout-528 SFSikaGrout-528 SF Sika
    flowable non-shrink silica-fume grout for tight clearances and voids.
  • SikaGrout-713SikaGrout-713 Sika
    non-shrink mineral-aggregate grout for precision equipment grouting.
  • SikaGrout-825 MFSikaGrout-825 MF Sika
    cementitious installation grout for embedding supports, connections and precast joints, 15–160 mm.
  • SikaGrout-828 Sika
    non-shrink cementitious grout for ballastless slab track and equipment, 10–80 mm layers.
  • SikaGrout-885 MFSikaGrout-885 MF Sika
    low-dust metallic-aggregate grout for heavy and dynamically loaded machinery.
  • SikaGrout-9200SikaGrout-9200 Sika
    formerly MasterFlow 9200; for onshore VESTAS turbine foundations, at least 135 MPa at 28 days, layer 25–600 mm.
  • SikaGrout-928 (MasterFlow 928)SikaGrout-928 (MasterFlow 928) Sika
    non-shrink flowable cementitious grout, 20–200 mm.
  • SikaGrout-9400SikaGrout-9400 Sika
    formerly MasterFlow 9400; for tower flanges and anchor bolts, from 130 MPa at 28 days, layer 25–600 mm.
  • SikaGrout-950 Sika
    high-strength non-shrink grout for turbines, presses and crane rails.
  • SikaGrout-980 (MasterFlow 980) Sika
    cementitious micro-concrete for deep pours, aggregate up to 8 mm.
  • Skrepa SamonivelirSkrepa Samonivelir Penetron
    flowable B50 mortar for horizontal repairs and grouting under columns and equipment.

Epoxy grouts 54

  • Chockfast Black ITW (Chockfast)
    compound for hot reciprocating and rotating machinery, resistant to creep at elevated temperatures.
  • Chockfast OrangeChockfast Orange ITW (Chockfast)
    chocking compound for marine engines, gearboxes, generators, compressors, pumps and crane rails; holds approvals from marine classification societies.
  • Chockfast RedChockfast Red ITW (Chockfast)
    epoxy grout for large machinery and baseplates.
  • Chockfast Red VersaflowChockfast Red Versaflow ITW (Chockfast)
    high-flow pumpable grout.
  • Escoweld 7505E/7530 ITW (Chockfast)
    flowable low-exotherm grout for dynamically loaded equipment.
  • Euclid E3-Deep Pour Euclid Chemical
    deep-pour epoxy grout for equipment bases, lifts up to 46 cm.
  • Euclid E3-Flowable Euclid Chemical
    high-flow epoxy grout for wide baseplates, rails and anchor bolts.
  • Euclid E3-HCR Euclid Chemical
    chemical-resistant novolac epoxy grout for pumps and process equipment.
  • Euclid E3-Xtreme Euclid Chemical
    ultra-high-strength epoxy grout for pumps, compressors and dynamic loads.
  • Five Star DP Epoxy GroutFive Star DP Epoxy Grout Five Star Products
    low-exotherm deep-pour grout.
  • Five Star DP Epoxy Grout PGFive Star DP Epoxy Grout PG Five Star Products
    pumpable, low-exotherm, pour depth 12.7–152.4 mm (0.5–6 in); the manufacturer includes it in its range of solutions for wind energy.
  • Five Star Epoxy Chock / Epoxy Chock EXFive Star Epoxy Chock / Epoxy Chock EX Five Star Products
    epoxy chocking compound for compressors, turbines and other aligned machinery.
  • Five Star Epoxy Novolac GroutFive Star Epoxy Novolac Grout Five Star Products
    chemical-resistant epoxy novolac grout for pumps and process equipment.
  • Five Star HP Epoxy GroutFive Star HP Epoxy Grout Five Star Products
    high-early-strength grout for rotating equipment.
  • Five Star Rapid Epoxy GroutFive Star Rapid Epoxy Grout Five Star Products
    epoxy grouts for dynamically loaded equipment.
  • Five Star SP Epoxy Grout PGFive Star SP Epoxy Grout PG Five Star Products
    pumpable, 113.8 MPa (16 500 psi) after one day; its listed uses include wind turbine bases.
  • Five Star XP 230 Epoxy Grout (Wind)Five Star XP 230 Epoxy Grout (Wind) Five Star Products
    ultra-high-strength grout for wind turbine towers, 158.6 MPa (23 000 psi) at 28 days.
  • Fosroc Conbextra EBG(M)Fosroc Conbextra EBG(M) Fosroc
    thixotropic epoxy bearing grout for 3–50 mm gaps under equipment.
  • Fosroc Conbextra EP10Fosroc Conbextra EP10 Fosroc
    low-viscosity grout for very thin gaps and injection.
  • Fosroc Conbextra EP10(M)Fosroc Conbextra EP10(M) Fosroc
    moisture-insensitive epoxy for grouting and injecting 0.25–10 mm gaps.
  • Fosroc Conbextra EP120Fosroc Conbextra EP120 Fosroc
    low-exotherm epoxy grout for 65–120 mm gaps.
  • Fosroc Conbextra EP120 PlusFosroc Conbextra EP120 Plus Fosroc
    low-exotherm grout for large pours.
  • Fosroc Conbextra EP150 Fosroc
    epoxy grout with long working time for 10–150 mm gaps under heavy equipment.
  • Fosroc Conbextra EP160Fosroc Conbextra EP160 Fosroc
    solvent-free epoxy grout for deep gaps up to 200 mm.
  • Fosroc Conbextra EP300Fosroc Conbextra EP300 Fosroc
    low-exotherm epoxy grout for large volumes and gaps up to 300 mm.
  • Fosroc Conbextra EP40Fosroc Conbextra EP40 Fosroc
    free-flowing epoxy grout for 5–40 mm gaps under machinery and rails.
  • Fosroc Conbextra EP65Fosroc Conbextra EP65 Fosroc
    low-exotherm flowable epoxy grout for 35–65 mm gaps.
  • Fosroc Conbextra EP65 PlusFosroc Conbextra EP65 Plus Fosroc
    fast-curing high-strength epoxy grout for machinery and crane rails.
  • Fosroc Conbextra EP75 Fosroc
    highly creep-resistant epoxy grout for 10–75 mm gaps.
  • Fosroc Conbextra EP80EFosroc Conbextra EP80E Fosroc
    free-flow epoxy grout for 10–80 mm gaps under crane rails and machinery.
  • Fosroc Conbextra EPGFosroc Conbextra EPG Fosroc
    epoxy grout for 10–150 mm gaps under heavy dynamic loads.
  • Fosroc Conbextra EPGP Fosroc
    general-purpose epoxy grout for 20–80 mm gaps under heavy and dynamic loads.
  • Fosroc Conbextra EPHT Fosroc
    heat-resistant epoxy grout for rails, turbines and machinery, service up to 160 °C.
  • Fosroc Conbextra EPRFosroc Conbextra EPR Fosroc
    epoxy grout for 10–120 mm gaps under crane rails and machinery.
  • Fosroc Conbextra EUWFosroc Conbextra EUW Fosroc
    water-insensitive epoxy for underwater grouting and injection of narrow gaps.
  • PAGEL EH196S Pagel
    epoxy grouts for rails and precision supports.
  • Planigrout 300Planigrout 300 Mapei
    flowable epoxy mortar for the foundations of presses and heavy machinery, rails and anchors.
  • Planigrout 300 SPPlanigrout 300 SP Mapei
    free-flowing epoxy grout (Mapei Far East technical data sheet) for machinery, rails and overhead crane baseplates.
  • Planigrout 350Planigrout 350 Mapei
    grout for thick layers under heavy machinery.
  • Sikadur-12 ProntoSikadur-12 Pronto Sika
    rapid-curing acrylic (not epoxy) mortar for grouting and repairs from −10 °C, 5–30 mm.
  • Sikadur-42 Grout Pak LESikadur-42 Grout Pak LE Sika
    low-exotherm epoxy grout kit for baseplates, machinery and crane rails.
  • Sikadur-42 Grout-Pak Sika
    pre-proportioned epoxy grout kit for baseplates, machinery and crane rails.
  • Sikadur-42 HESikadur-42 HE Sika
    epoxy grout for medium-thickness layers, suitable for use at low temperatures.
  • Sikadur-42 LP Sika
    multi-purpose epoxy grout for crane tracks, baseplates and anchors, 6–60 mm.
  • Sikadur-42 MP Normal Sika
    multi-purpose three-component epoxy grout for machinery, baseplates and crane rails; the technical data sheet gives a layer thickness limit that depends on temperature.
  • Sikadur-42 PC Sika
    castable epoxy grout for pile caps and structural cavity filling, 10–100 mm.
  • Sikadur-42 TSikadur-42 T Sika
    three-component epoxy grout for baseplates, machine foundations, rails and anchors, 12–50 mm.
  • SikaFlow-400 Sika
    free-flowing epoxy grout for machinery, anchors and crane tracks, 20–80 mm.
  • SikaFlow-647 Sika
    liquid epoxy grout for pressure injection under baseplates and into cracks.
  • SikaFlow-648 (MasterFlow 648)SikaFlow-648 (MasterFlow 648) Sika
    epoxy grout for equipment under vibration, 10–150 mm.
  • SikaFlow-649SikaFlow-649 Sika
    high-strength high-temperature epoxy grout for machinery, rails and wind turbines.
  • SikaFlow-668SikaFlow-668 Sika
    epoxy chock grout for mounting compressors, turbines and machinery.
  • SikaFlow-678SikaFlow-678 Sika
    low-exotherm epoxy grout for deep pours under equipment.
  • SikaFlow-690 Sika
    very-high-strength flowable epoxy grout for wind turbines, pumps and compressors.

Concrete repair

Levelling and finishing compounds 8

  • Fosroc Nitomortar FCFosroc Nitomortar FC Fosroc
    epoxy fairing coat for filling concrete blowholes before epoxy coatings.
  • Fosroc Renderoc FCFosroc Renderoc FC Fosroc
    R2 cementitious fairing coat for filling blowholes up to 3 mm.
  • MapefinishMapefinish Mapei
    two-component R2 mortar for thin levelling and protection of concrete.
  • MonofinishMonofinish Mapei
    polymer-modified R2 levelling and protective mortar for concrete, 1–3 mm layers.
  • Sika MonoTop-620Sika MonoTop-620 Sika
    class R3 levelling and finishing mortar for blowholes and surface reprofiling.
  • Sikagard-720 EpoCemSikagard-720 EpoCem Sika
    epoxy-cement micro mortar for levelling and pore sealing, even on damp concrete.
  • Triblock FinishTriblock Finish Mapei
    epoxy-cement mortar for levelling damp concrete before epoxy and PU coatings.
  • Skrepa FinishnayaSkrepa Finishnaya Penetron
    fine B25 W18 finishing mortar for defects up to 10 mm and levelling.

Reinforcement corrosion protection 6

  • Fosroc Nitoprime Zincrich PlusFosroc Nitoprime Zincrich Plus Fosroc
    zinc-rich primer for exposed reinforcement in the Renderoc repair system.
  • Mapefer 1KMapefer 1K Mapei
    one-component cementitious anti-corrosion coating for reinforcing steel to EN 1504-7.
  • Sika FerroGard-903+Sika FerroGard-903+ Sika
    penetrating corrosion inhibitor impregnation for reinforced concrete without breaking out.
  • Sika MonoTop-610Sika MonoTop-610 Sika
    polymer-modified cementitious rebar protection and bonding primer with corrosion inhibitor.
  • Sika MonoTop-910 NSika MonoTop-910 N Sika
    cementitious rebar corrosion protection and bonding primer for Sika MonoTop repairs.
  • SikaTop Armatec-110 EpoCemSikaTop Armatec-110 EpoCem Sika
    epoxy-cement rebar protection with inhibitor and bonding primer for repair mortars.

Protective coatings and impregnations for concrete 14

  • Antipluviol SAntipluviol S Mapei
    colourless siloxane water-repellent impregnation for concrete, render, brick and stone.
  • Colorite BetonColorite Beton Mapei
    semi-transparent acrylic paint protecting concrete from carbonation, keeping its texture.
  • Duresil EBDuresil EB Mapei
    hydrocarbon-resin modified epoxy paint protecting concrete and steel from acids and sewage.
  • Elastocolor PaintElastocolor Paint Mapei
    crack-bridging elastomeric acrylic paint protecting concrete against carbonation.
  • Fosroc Dekguard E2000Fosroc Dekguard E2000 Fosroc
    water-based crack-accommodating elastomeric coating for protecting reinforced concrete.
  • Fosroc Dekguard SFosroc Dekguard S Fosroc
    solvent-based acrylic anti-carbonation coating protecting concrete and masonry.
  • Mapecoat I 24Mapecoat I 24 Mapei
    epoxy paint protecting concrete against acids, alkalis and petroleum products.
  • Planiseal WR 100Planiseal WR 100 Mapei
    pure-silane water repellent for bridges, piles and marine structures, cuts chloride ingress.
  • Planiseal WR 40Planiseal WR 40 Mapei
    water-based silane (40 %) hydrophobic impregnation for reinforced concrete.
  • Sikagard-550 W ElasticSikagard-550 W Elastic Sika
    elastic crack-bridging acrylic coating protecting concrete against carbonation.
  • Sikagard-680 S BetoncolorSikagard-680 S Betoncolor Sika
    solvent-borne methacrylic coating protecting concrete against carbonation and weathering.
  • Sikagard-705 LSikagard-705 L Sika
    class II silane hydrophobic impregnation protecting concrete against chlorides and moisture.
  • Sikagard-706 ThixoSikagard-706 Thixo Sika
    thixotropic class II silane impregnation cream for vertical and overhead concrete.
  • PenePoxy 2KPenePoxy 2K Penetron
    two-component epoxy chemical-resistant concrete coating and tape adhesive.

Crack injection 8

  • EpojetEpojet Mapei
    solvent-free epoxy resin for crack injection and anchoring in concrete.
  • Epojet LVEpojet LV Mapei
    very low viscosity epoxy resin for injecting microcracks in concrete.
  • Epojet SLVEpojet SLV Mapei
    super-low-viscosity epoxy resin for injecting cracks, including damp ones.
  • Fosroc Nitofill EPLVFosroc Nitofill EPLV Fosroc
    low-viscosity epoxy resin for injecting 0.1–9 mm cracks in concrete.
  • Sikadur-52 Injection LPSikadur-52 Injection LP Sika
    long pot life epoxy resin for crack injection in hot weather.
  • Sikadur-52 Injection NormalSikadur-52 Injection Normal Sika
    low-viscosity epoxy resin for structural injection of cracks up to 5 mm.
  • StabilcemStabilcem Mapei
    expansive cement binder for injection and anchoring grouts and shrinkage-compensated concrete.
  • Skrepa M600 InyektsionnayaSkrepa M600 Inyektsionnaya Penetron
    cement injection grout for cracks over 0.4 mm, voids and anchoring.

Repair mortars 25

  • ARB-10ARB-10 Mapei
    non-shrink fibre-reinforced R4 concrete mix for bridges, airfields and roads, 50–300 mm layers.
  • ARB-10FARB-10F Mapei
    non-shrink steel-fibre R4 concrete mix for bridges and pavements under impact loads.
  • Fosroc Renderoc DSFosroc Renderoc DS Fosroc
    fibre-reinforced low-rebound R4 repair mortar for dry spraying.
  • Fosroc Renderoc LA55Fosroc Renderoc LA55 Fosroc
    free-flowing low-alkali R4 micro-concrete for repairs cast in formwork.
  • Fosroc Renderoc SFosroc Renderoc S Fosroc
    polymer-modified R4 class repair mortar for reinstating reinforced concrete.
  • Mapegrout 230Mapegrout 230 Mapei
    fibre-reinforced thixotropic R2 mortar for surface concrete repair, 5–40 mm layers.
  • Mapegrout Fast-Set R4Mapegrout Fast-Set R4 Mapei
    rapid-setting fibre-reinforced thixotropic R4 repair mortar, 5–40 mm layers.
  • Mapegrout Hi-FlowMapegrout Hi-Flow Mapei
    fibre-reinforced flowable R4 repair mortar for pouring into formwork.
  • Mapegrout MFMapegrout MF Mapei
    thixotropic R4 repair mortar with polymer and steel fibres, 20–60 mm layers.
  • Mapegrout SFMapegrout SF Mapei
    pourable R4 repair mortar with polymer and rigid steel fibres, 20–60 mm layers.
  • Mapegrout SV-N FiberMapegrout SV-N Fiber Mapei
    fibre-reinforced pourable R4 repair mortar for hot weather, +15…+35 °C.
  • Mapegrout SV-R FiberMapegrout SV-R Fiber Mapei
    ultra-rapid-hardening fibre-reinforced pourable R4 repair mortar, usable down to −5 °C.
  • Mapegrout T40Mapegrout T40 Mapei
    medium-strength thixotropic R3 repair mortar for concrete surfaces.
  • Mapegrout ThixotropicMapegrout Thixotropic Mapei
    fibre-reinforced thixotropic R4 mortar for concrete repair without formwork.
  • Planitop HPC Floor RPlanitop HPC Floor R Mapei
    high-strength fibre-reinforced R4 mortar for strengthening slab compression zones, 10–50 mm.
  • Planitop HPC LV RPlanitop HPC LV R Mapei
    high-performance non-shrink R4 concrete for repair, strengthening and grouting, over 110 MPa.
  • Sika Gunit-03 Normal Sika
    class R4 dry-mix shotcrete for bridges, tunnels, dams and channels.
  • Sika MonoTop-412 NSika MonoTop-412 N Sika
    fibre-reinforced thixotropic class R4 mortar for structural concrete repair.
  • Sika MonoTop-612Sika MonoTop-612 Sika
    thixotropic polymer-modified mortar with silica fume for columns, beams and slabs.
  • Sikadur-41 CF NormalSikadur-41 CF Normal Sika
    thixotropic epoxy mortar for edges, voids and overhead repairs.
  • SikaEmaco S 488SikaEmaco S 488 Sika
    shrinkage-compensated thixotropic R4 mortar for bridges, tunnels and industrial structures.
  • SikaEmaco T 1100 TIXSikaEmaco T 1100 TIX Sika
    rapid-hardening R4 mortar for urgent repairs and manhole frame bedding.
  • Skrepa ZimnyayaSkrepa Zimnyaya Penetron
    rapid-hardening B50 repair mortar for application down to −10 °C.
  • Skrepa M500 RemontnayaSkrepa M500 Remontnaya Penetron
    fibre-reinforced thixotropic B35 repair mortar, 5–50 mm layers, sprayable.
  • Skrepa M700 KonstruktsionnayaSkrepa M700 Konstruktsionnaya Penetron
    fibre-reinforced B50 structural repair mortar, 6–60 mm layers, 70 MPa.

Strengthening with composites 11

  • CarboplateCarboplate Mapei
    pultruded carbon fibre plates for flexural strengthening of concrete and timber.
  • EporipEporip Mapei
    epoxy adhesive for new-to-old concrete joints and bonding precast elements and steel to concrete.
  • Fosroc Nitobond EPFosroc Nitobond EP Fosroc
    epoxy bonding agent for placing new concrete and screeds on existing concrete.
  • Fosroc Nitowrap CWFosroc Nitowrap CW Fosroc
    unidirectional carbon fibre fabric for external flexural and shear strengthening of concrete.
  • MapeWrap C UNI-AXMapeWrap C UNI-AX Mapei
    unidirectional carbon fibre fabric for strengthening concrete, masonry and timber.
  • Sika CarboDur SSika CarboDur S Sika
    pultruded CFRP plates for externally bonded strengthening of slabs, beams and bridges.
  • Sikadur-30Sikadur-30 Sika
    epoxy structural adhesive for bonding CFRP plates and steel plates in strengthening.
  • Sikadur-31 CF NormalSikadur-31 CF Normal Sika
    thixotropic epoxy structural adhesive and repair mortar for bonding.
  • Sikadur-32 NormalSikadur-32 Normal Sika
    epoxy bonding agent for fresh-to-hardened concrete and structural bonding.
  • Sikadur-330Sikadur-330 Sika
    epoxy impregnating resin for SikaWrap carbon fabrics and slot-bonded CFRP plates.
  • SikaWrap-230 CSikaWrap-230 C Sika
    unidirectional carbon fibre fabric for strengthening columns, beams and masonry.

Manufacturers

3M AESTUVER Belzona Blair Rubber Carboline Euclid Chemical Five Star Products Fosroc Henkel (Ceresit) Hilti International (AkzoNobel) Isolatek ISOMAT ITW (Chockfast) ITW (Densit) Jotun Kansai Paint KÖSTER Kryton Mapei MC-Bauchemie Nullifire Pagel Penetron Perlita y Vermiculita Polycorp PPG Promat Protecta REMA TIP TOP Remmers ROCKWOOL Rudolf Hensel Rust-Oleum Schomburg Sherwin-Williams Sika Steuler-KCH Teknos Xypex ZINGA (Zingametall) ZRC Worldwide